I went to my local RV shop and bought 6 more mounting cups and a tube of silicone. I siliconed those on the back of my 3950s ramp door with the ladder at its lowest point still hanging over the top and then I simply move the ladder back there for travel. it only takes a minute to replace back to...
I had the exact same thing happen to mine a couple of weeks ago and thought i just opened to fast but I found that the shock on one side was sticking while the other side was still pushing out. I replaced both shocks and installed a peice of sheet metal (20Gauge) glued on the side of the door...
My pump went out exactly like you are saying, worked one minute not the next. Tested it at the fuse at pump make sure you test this one (1 foot from pump itself) By checking for power with switch on and then switch off. If you have power at the pump fuse then pump itself is bad. I actually had...
Electric from inverter should power microwave so you can cook without waking up the camp by having to start generator early in morning. I moved my microwave circuit to the inverter by way of inverter powered outlet in passthru storage area. Also changed micro outlet to dual outlet and installed...
Doug I have the 3950 with a 2010 Razr and my 06 yami 250 no problem, I put the bike in sideways at the front and razr all the way over to the off door side and could easily get another bike in sideways at the back. Sometimes whwn we are doing the lake with bycles in the garage I will but my bike...
Try this link to the manuals page at Lippert Corporation. http://www.lci1.com/index.php?option=com_content&view=article&id=56-leveling-owerns-manuals&catid=38-owners-manuals&Itemid=66
I am pulling our nused 2009 3950 with a 2010 dodge 3500 laramie megacab package and I have to admit this combo is the cats meow after pulling my tow behind trailer (30 foot toyhauler) with a 1999 f350 bagged and loaded w/banks system. I am in the process of installing the Mohryde pinbox because...
Johndar,
Thanks for your reply, The genset is surrounded by a soundproofing cabinet also would have to be removed as well as completely removing genset and batteries to get to that leg. I am hoping to raise trailer high enough to drop and install leg thru bottom of landing belly area. I will be...
I am wondering how hard to remove genset to get to drivers side leg. Maybe easier to cut galvanised sheeting behind propane tank and then just bolt in new acsess panel there. seems like it would make maintnenance easier for that jackleg in the future. I would love some input on this as next...
I have a 3950 Cyclone and I am interested in the ground control system, But it looks to me like the right front landing leg is behind the generator and the generator would have to come out to replace it. Has anyone done an install on a 3950 yet?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.