Search results

I really appreaciate the info, however I'm still a little fuzzy on where you are suggesting to put the penetrating oil on, the actual valve, the cable, the pull handle. I am currently at work and can't crawl underneath and get look at or I might understand a little (then again I might not)...

What kind of lube. Do you mean lube the cable, or the actual valve. Do you mean where it connects under the black tank, not where you pull the handle. The reason I ask is the only gas lines I can think would be over by the pull handles.

Does anyone have any ideas or experience with the tank valves becoming extemely hard to open and or close, I am afraid that it is getting ready to break and I want to try to avoid it breaking with a tank full of trouble. Where, how would I gain access to the point where the valve opens and...

Alkyspeed, Am I missing something? Didn't you write that you were inflating 65# max tires to 72# and then complaining that it isn't inflation pressure, owner neglect or normal usage that caused failure. I am pretty sure that over inflating a tire could be considered improper inflation, owner...

I run a dehumidifer. Bought it at Lowe's. put it in the closet( have to leave the door open) . Then added the drain hose and routed down through the basement and out the bottom. Now I never have to empty a bucket. I never have a humidity or condensation problem since making this addition.

I was wrong. It is a GE Model JES1139BL01. Basically I went out to Wal-mart, Target, any place that had microwaves, took a tape measure and found one that fit. Then built a new mount and now I have a better micowave and it didn't cost as much as a new apolla rv microwave.

What do you mean not 10 ply but 10 ply rated. I just checked the web site and I couldn't find a distinction between 10 ply and 10 ply rated.

Same thing happened to me. To my knowledge I didn't have an extended warranty to cover it. So I took it to a small appliance shop and they fixed it(for about a month). Only cost about as much as a new one to get it fixed. After it crapped out again. I went to target found a sharp carasouel...

Thanks for the info. Is there a minimun tire spacing that should not be exceded for saftey.

I was looking at putting maxxis tire on my trailer and noticed that the maxxis tires are slightly larger diameter than the china bombs. I think it would make my bal chocks useless. How close between the wheels is two close. Is anyone running maxxis tires and if so what kind of clearance to...

Got a 2" topper from wal-mart and now I love my bed.

Original batteries. It goes to the position it is in when turned off. What I saw it do was, suddenly the battery gauge went completely flat, like I had just turned the truck off. Then just as suddenly, popped right back on and ran the next 60 miles without incident. I checked the battery...

I've got a 2004 Dogdge 2500 quad cab. Once on each of the last two days the battery gauge flatlined on me. It stayed flat lined for about 20 seconds during which the check gauges lite comes on. Then the gauge comes back to life with full power and the check gauges lite goes off. Anyone...

Any idea where the cross members are. If I can find them, I guess I should predrill a hole then screw it in with a little loctite on it. Any chance Heartland would have the specs on where the precise placement of the crossmembers might be.

You can get a carrier low profile on ebay for around $570 plus around $100 shipping. Self install is easy if I did it. The only hard part is getting it on the roof. Of course if you have to move a satelitte dish, that's something I don't have a clue about.

I don't think moisture is an issue. I has been a little saggy since I got it. It just seems to be sagging more as time goes on. Unfortunately It is out of warranty. Any ideas on a quick fix that I could do.

Has anyone had the overhang (area underneath the bedroom) begin to sag. Seems like the panel (fiberglass, plastic, or whatever it's made of ) is coming lose. Does anyone know how it is fixed on to the frame.

I have a penguin low profile 13.5 k. It is easy to install by yourself. Hard part is getting it on the roof. Works great, have also heard good things about carriers low profile unit. Check ebay, I have seen some pretty cheap prices there.

Ray, thanks for the info about shurflo. I called this afternoon and spoke with them and when I told them the model number (3900-0206) they said to UPS it to them and they would send me a new ASAP. The guy I spoke to said the the model 3900-0206 had known defect and they had replaced as many of...

Maybe that is what I have going on. I had never used my freshwater tank. But recently I did fill it because we were without power and wanted to have some water in reserve if the well went out. When I tried to test it the pump wouldn't pump anywater. I got in the basement and opened a...

This maybe a stupid question but, where is the check valve, what does it look like, is it part of the water pump. Basically how do I identify it so that I can replace it.

I have an 07' 3400 RL. As I understand the layout of the tanks, I have a drain on the freshwater tank (at least I thought it was the drain for only the freshwater tank) and a couple of valves on the docking station for emptying the lines. I am getting ready for winterizing my unit and opened...

Thanks for the info, Ray I think mine maybe like yours. I have the fresh water drain and then in the UDC I actually have two valves. I dug out a piece of paper that says I'm supposed to open the closed one and close the open one. then turn on the water pump. Is this like yours. Another...

Silly question but, how many low point drains are on an 07' 3400RL. I no there is one. But someone told me there are two one for hot water and one for cold. If there is more than one, any idea where they are.

My 2007 3400RL came with a fantastic fan and it was wired and framed for the second a/c. So I would bet that you can still get them that way. If you are considering adding the second A/C I would strongly suggest getting it that way from the factory. It will be cheaper in the long run and no...

Thanks for the info on the possible leaks around the furnace I will check. What about the 2" hose. It is just loose under the bedroom. Is it supposed to be this way (heating that space). What about the underbelly where the tanks are. How does the heat actually get to the tanks for heating...

Thanks for the info on the ducting under the furnace. I checked the ducts with a mirror and a flashlight. It is clear from one end to the other. Any reason that the airflow is so poor thru the ducting and is gale force in the bedroom. Does this ducting also heat the underbelly. Because...

I was looking at my furnace this morning and noticed that there is three ducting hoses out of it. One goes (4")to the vent in the bedroom, one goes (4") to the vent in the bathroom, one goes (2") goes to the space under the bedroom for heating the underbelly. I have a couple of questions...

I have an 07' 3400 RL. I was in the basement and pulled off the wall to look around and see how well insulated and heated it was underneath. I noticed that there is a 2" hose loose behind the wall and around the docking station. I also see there is a 4" hose to the bathroom heat register. I...

I was told to use Dicor.

I just noticed the basement door on the docking station side of my 07' 3400 RL is delaminating. Is this covered under warranty. Can Heartland replace or repair this. I checked the rest of the trailer and this one door is the only one have the problem.

Are you saying that the plumbing schematic is top secret. Would hate for the competition to know the placement of my black tank, lol. How about this, maybe the factory can answer this question. Approx. how many feet of pipe is used to plumb the black tank, and the two grey water, how many...

Is there a schematic showing the position of the tanks (all tanks) and the plumbing (pipes) . I am going to put the electric heating pads on my tanks and the pipes and elbows. If I have the plumbing layout then I can order what I need (not what I hope I need). I don't want to have to remove...

Any suggestions about keeping the water supply from the CG turned on. Keeping the water, hose, and connections from the ground (spigot) to where it enters the trailer from freezing.

I was wondering if some of you will be using you trailer this winter in areas where you will have temps in the 20's. and if so what will you be doing to get your trailer ready for this. Maybe skirting, adding heat tape, etc. I am going to be using my trailer in Southern Arkansas for a...

Does anyone have a schematic of the routing of the heating hose(s) for the basement. I couldn't see where this 2" hose should connect to anything. If it meant to go into the underbelly, I would really like to know where to route. I figure now is the time get ready for the colder temps as I...

bump bump.

Where and or what does the 2" hose connect to, I was just underneath mine and saw this 2" hose, It was just laying there near one of the plumbing pipes . Shouldn't it be connected to something.

I have an 07' 3400 RL, I was looking under the shower (tracking a leak) behind the basement wall and noticed a 2" hose, looked like the same 4" hose that goes to my heat duct. It was not connected to anything and I couldn't see what it might go to. It would have been a chore to get back in...

It's a little hard to find on their web site. You kind of have to poke around. It seems like the three times I've been on their website I could only find it by stumbling around. I called Discount tire and they can get them in 2 days. Quoted me a price (mounted balanced with the good valve...