Search results

Yeah likely not going to happen , would have to match paint and decals and all that stuff, plus I live in Alberta Canada If you decide to replace instead of repair there are used doors out there. When we were in Goshen in October there are 2 places that have these for sale. One place is...

Ours is Lippert, still trying to work something out with the dealer, likely have to remove the door and take it in to have them rebuild it, I’m on a seasonal site and for me to take the whole trailer in and leave it simply won’t work, I was going to try and disassemble it myself at the camp...

So I purchased this 2016 cyclone 4200 brand new in 2016, late last year I noticed the side patio floor becoming squishy, after a bunch of research I found others have had the same issue with water getting into the underlayment via the bolt holes. Of course this is out of warranty now, and isn’t...

I know it's definetly not for the electric side of the hot water heater as that one is in the panel with the rest Sent from my iPhone using Tapatalk

I will later this week when I'm out there, was hoping someone with a 4200 would chime in to confirm Sent from my iPhone using Tapatalk

We purchased a 2015 cyclone 4200 a year ago and I am curious about a switch below the instrument panel. All the other switches gauges are concealed behind the door to the left of the stairs going to the main bedroom however there is a single standalone switch below the door that hides all the...

Replaced the cheap heartland awning lights, and moved into our new seasonal site overlooking the lake :) Sent from my iPhone using Tapatalk

Thanks for the info , looks easy enough Sent from my iPhone using Tapatalk

Another question , I've looked on eBay today, and there are several brands ect , colors and different lengths available, does anyone know whether or not those strip lights can be cut to a desired length ? My 1 awning is 18 foot 6 inch tube but the strip light in it is shorter then that, I was...

Hind sight 20/20 I should have seen if I could order them in a different color Sent from my iPhone using Tapatalk

Has anyone had to change their led awning lights out before? We have a 2015 cyclone 4200 with 2 separate awnings and in the last 2 weeks several bulbs in the led strips have gone out, I was just wondering what kind of a project it is to change the strips out as I have 2 on order through warranty...

Ok thanks I will start thete Sent from my iPhone using Tapatalk

Is anyone able to clarify where the fuel pump may be located on a 2015 cyclone 4200with the Onan 5500? Sent from my iPhone using Tapatalk

I will look into that as well Sent from my iPhone using Tapatalk

Yeah kinda checked all that out, the genser has 3 hours on it everything is new, tank is full of fuel Sent from my iPhone using Tapatalk

Seem to be having and issue with our cyclone 4200, came equipped with the Onan 5500 generator but the gen keeps tossing a code after I am able to get it started. Error code 36, it has a total of 2.5 hours on it and has done it since we took possession of it from the dealer. I did manage to get...

Also keep in mind the Onan generators are famous for having issues with the float, I have had 2 of them now that actually had tiny pin holes in them therefore filling the float making it useless, my new 4200 I bought last year has 1 hour on it and it's having issues already, starts up for 30...

Just putting it out there as I have tried lol, learnt my lesson after about 30 km, and went right to a dually Sent from my iPhone using Tapatalk

I would say you definelty would want a dually, unless of course your comfortable with white knuckle driving all the time, mines a 4200 tried it once with a swd 1 tonne, not a pleasant experience, picked up a megacab dually and don't even notice behind me anymore Sent from my iPhone using Tapatalk

The running lights will be the pin to the left of the top centre on your trucks plug, usually brown colored wire, make sure you have a good ground on your test light , I am dealing with the same issue this morning lol Sent from my iPhone using Tapatalk

Crown land, staying outside of paid camping areas Sent from my iPhone using Tapatalk

X2 lol , need 2 of them one for the side patio on 4200 too Sent from my iPhone using Tapatalk

The picture I posted above is of my 2014 megacab, short box, I do have a factory drop in puck style hitch that is a slider, however I've never had to use it with the way the front cap is now designed, I can almost jack knife the trailer without it coming close to the cab corners. Be aware...

Cheap code reader from any automotive store with a code clearing function, diesel owners best friend, saved my bacon more times then I can count Sent from my iPhone using Tapatalk

I wouldn't think so, It's a brand new 4200, I just took it off the lot 2 weeks ago, but guess I can climb up on the roof and have a look, not really sure what to look for except an open ended pipe or something , unless a bird made a nest up there or something. It's kind of aggravating...

I think so too, haven't been able to narrow it down yet though, can't be from the site septic service I have the valves closed, and a makeshift p trap at the end of my sewer hose Sent from my iPhone using Tapatalk

Yours was clogging up badly too? I use lots of that digested deodorizer , but yet it still burps when you flush it, and clogs up somewhat, not sure what the deal is Sent from my iPhone using Tapatalk

Very much like it , however the plumbing system for the main bathroom is something to be desired, lavatory seems to plug very easy, and getting sewer gas back through the bowl when flushing and the valves are closed on the rig . Haven't been able to narrow down a cause as of yet Sent from my...

Thanks Sent from my iPhone using Tapatalk

Dragging it around with a 2014 mega cab dually, doesn't even make it grunt :) Love the 4200 Sent from my iPhone using Tapatalk

Seems reasonable to me, shouldn't need a dump station to test any of it as it should be fresh water at first, we did all that and then some with our pdi on our new 4200 Sent from my iPhone using Tapatalk

Re: Oh What did I just do?????? You will never look back , same as mine and I drag a 4200 around Sent from my iPhone using Tapatalk

Guess mine didn't make the cut even though we bought it off the showroom floor 2 weeks ago.. Sent from my iPhone using Tapatalk

Will look this evening when I get out to site Sent from my iPhone using Tapatalk

Wierd, just bought a 2016 4200, 2 weeks ago and it's got the crap blow max tires on it. Due tell, obviously the above statement isn't correct, or maybe that is just state side as I bought it in Canada , and even questioned the dealer about it Sent from my iPhone using Tapatalk

Awesome thanks for clarifying all this Sent from my iPhone using Tapatalk

Thanks for your input above, when looking at the Anderson 4 way at first I didn't even see the writing winterization on it, tiny letters Sent from my iPhone using Tapatalk

I do have the 4 way Anderson valve on the 4200, however it's labeled as city, tank, normal, and sanitize I'm guessing just a regular short hose hooked into the city inlet and tune the dial to sanitize ? The other question that poses to me what is the normal position for when there is city ...

Hello all, I was curious on the procedure to winterize our new 2016 cyclone 4200, I have done our old 3950 quite a few times so not completely lost on it. I cannot seem to find an access hose or valve to isolate the water pump to draw directly from antifreeze jugs , anyone point me I the right...

Also if the tank isn't venting in the event you have dual tanks, you will not actually have full water capacity, I had a 3950 with dual tanks, and when water got into the vent line it wouldn't allow the rig to fill to its true capacity, light air pressure blown into the vent line occasionally...