Search results

It actually didnt rip until the slide was 3/4 of the way in, then i used it again and it got worse like in the pic.

I took out the pos 26" Jensen and replaced it with a 32" Dynex led. Had to rip down the stiles on the side of the cabinet and fill the old screw holes. Also had to build out the back of the cabinet so the tv would be flush to front, used same bracket. Then mounted the Jensen outside in front...

I have a 2009 3795

Mine also has no teflon glide or no roller. Was wondering if Heartland uses the glides when there is no roller.

Does anyone know what would cause this and is it a common problem. There is no marking under the slide out, and nothing seems to be caught under the carpet. When I look inside the seals on the outside on the floor, it is full of sawdust, wire nuts, old screws and all kinds of other trash. I dont...

Bud sign is already up!!

Quick pic of our 3795 and pu. We love both.

Just finished with the glass door install on my 09 3795, should have ordered it with the unit (wife didnt think it would look good). Unit now feels alot bigger. Wasnt to bad except for finding the dumb stuff like the right ladder.

I had the same problem on my 3795 and as it turned out it was a bad fuel pump. The dealer did the repair and havent had a problem since.

My tv just started doing this, when on cable. Did you get yours fixed?

i will take a picture just let me know where to send it.

I have a Cyclone 3795 with the 12 person dinette option and a 26" Jensen lcd. The problem is when sitting on the couch closest to the tv, the picture looks dark and like a bunch of shadows, but if you stand directly in front of the tv, the picture if fine. The picture does get better as you...

sounds like your problem might be with your dealer. I also have a Cyclone, and would recomend it to anyone along with my dealer. I had some minor issues that my dealer caught during delivery, two of them water leaks that were fixed very easily. I also live in Oh and think you might want to try a...

Please let me know how much you spent for this upgrade, I am interested in the same thing and heard from another owner they paid $379, installed. I was also wondering how you like it.

Just returned from the Cleveland show and have been informed that the 3210, 3795, and 4210 are all discontinued for 2010 with some new models to be announced. I hope you can find another unit that will work for you or a left over model.

Check the fuel pump, heard that Onan had a bad run of pumps, mine included. Once replaced, runs like a champ.

My dealer is putting in a new motor on mine also, havent had it done yet, had to be ordered. Glad to hear it works.

The stands are good, but the room itself does not look like the picture at all, it goes up all wrinkled, doesnt fit, and the poles broke the first and last time set up. It is a universal fit and I dont think it quite fits the cyclone. If I had to do it over, I would spend the money and have one...

I have the x tend a room for my 3795, it was the biggest waste of $400 ive ever spent. the only good thing that came from it is the metal adjustable stands that we use to support the ramp.

My generator would sometimes run and sometimes not. Other times it would prime up, run for an hour or so, then die, wait a couple of hours and it would start again. I read somewhere that there Onan had a bad run of fuel pumps, and as it turns out I had one. Since it was replaced I havent had a...

I had the same problem and took it to my dealer, they found out that the motor was pulling 47 amps when under load. They said Heartland finally realized the motor isn't strong enough and have switched to a heavier duty motor, which was on backorder, and should be put in sometime in September.

In my Cyclone I have gone through 22 fuses in 10 voyages, finally took it to the dealer and found out the motor was pulling 47 amps, little too much for 30 amp fuse. The dealer contacted Heartland and they are sending out a new heavy duty motor, on back order of course, should be some time in...

When my gauge reads empty, I can put between 16 and 20 gallons in it and then it reads full, but where are my other 8 gallons? The gas does not last long either when running a/c.:( Last time out, ran it for 32 hours and went through over 50 gallons!:mad: My Yamaha ran forever on 3 gallons...

I suspect their short to save weight, as for strong I have already had two drawer bottoms break out, one just had underwear and socks in it! I will be rebuilding all of my drawers and will probably make them deeper if possible.

my rig wouldnt pump the last 1/3 of water either, so i took it to the dealer and they found the pick up tube was too short, gave me a longer one and no problems now.

you got it right, you put the valve in winterize mode, pull off the panel in the storage compartment, put the little tube coming from the pump in some anti freeze, and push the pump button in the uds to suck just enough anti freeze to winterize the pump, providing you blew out the lines with air.

Before we bought our cyclone, we had a Yamaha 3000iseb which would run our 13.5 air and microwave at same time, this genny was great. We would run our air all day and night on one tank of fuel, and it purred like a kitten. I should have kept it, this Onan is a gas hog.:(

Mine was in my storage compartment along with the wand for manually raising landing gear. When I did my walkthrough, the dealer didnt know what the wand was for.

if you take off the panels inside the storage area, I believe that the transfer switch is on the door side by the central vac. I have an 09 and there is actually a white access panel that I can see my switch through, right next to the vac, hopefully yours is the same.

I have now gone through 11 fuses on my landing gear in 4 trips. It is at the dealer now to see if they can find something wrong. Ill keep you posted.

the screen in my 3795 is held down by magnets, then there is a plate mounted on the garage floor, works okay.

me and my family would love to attend a rally and Ohio would be a great location considering the price of fuel. please keep me in the loop about any information and hopefully it happens.

I traced out the splitters in mine, and it was in the loft area behind the panel in the second compartment. i believe there was a 3 or 4 way splitter in there.