Search results

how much arc or camber bend is usually in a lippert 7000 axle everyone says my axles are bent but they were like this when I bought it

I have double checked with multiple trailer companies about the springs I do have the correct Springs the 24.875 traile and the 25 1/4 are considered the same spring both span at 26 inches when trailer sits on them and I argued with the supplier that the springs are a 24.875 if it has more than...

The table explains exactly what I thought but the trailer spring supply store does not stock the 7 leaf 24 7/8" eye to eye spring but was able to buy the same 6 leaf spring How bout any info on blocks? I installed new backing plates also total overhaul of you replace it all you know if...

put new springs on the 5er and was told for the 7000 lipperts the 6 leaf 25.25 Double eye springs are the largest weight capacity at 3500 that I can buy, the reason I even bring this up is the old ones looked very wore out looking like a W when they are weighed down so I put the new ones...

Sorry I was mid informed they are the sailun terra max h/t. LT235/85/16

It was jacked up by the axles jack was placed under the u bolts of the leaf springs I was right there through the tire purchase The tires are a tow max 235/75/16 load rating E I have done some research on the suspension that the leaf springs and bearings could have some thing to cause...

Tires were bought on 9-4-15 the first one i got replaced on 9-30-15 because of multiple spots like this one on this tire, (but i hadn't moved the trailer since i got home on labor day weekend because i burned up my landing gear motor and i just fixed the jacks on the 28th so now i took it in to...

I just had brand new tires installed 300 miles later and I have this it is 5" by 5" and only one spot on the whole tire Had the other side do it in about 6 spots les Schwab gave me a brand new tire for that side now driver side front tire has one wear mark!!!

yea after fighting through all these stupid issues i know that a quick 50 bucks and i could purchase this other switch, I've just hacked everything so bad and i would have just went to the two new switches but they are hideous looking and very bulky I'm trying to find the atwood triple switch...

It's going to work with the diodes I bought at RadioShack well under rated for these legs and it did work for a minute before the diode quit allowing current so I'll go to an electrical house and get the right ones for the application. Yes the switch I'm using to run both legs at one time is...

Yes that is better but now that I'm understanding this I can't find diodes that are rated for 30 to 50 amps 12v any suggestions

i wired right leg off battery #1 with inline fuse 30amp to switch directly to right leg motor, left leg comes off battery #1 also with another inline 30amp fuse to switch and directly to left leg motor the center combo switch is coming of gold power strip with inline 50amp fuse to switch and...

i wired two single switches off battery #1 and wired inline 30amp fuse directly to left jack with left switch and wired inline 30amp fuse directly to right jack from right switch, the switch up front of the trailer already had pow from gold Power strip and 50 amp in line fuse the rocker switch...

i don't have uploading access yet I'm new to this forum

I have Everything installed and wired the 2 new switches in the propane compartment so i could run individual jacks at a time, and i also left the original rocker switch on the front of the trailer to run both jacks at the same time but heres where I've hit the wall all three switches are...