Search results

That's correct. That was the easiest part of the entire job. Unfortunately, only a COAX was their so we still had ato run the control wire for the Winegard unit. We drilled a second hole up from the corner of the bedroom closet for it and ran the wire that way. Worked out real well.

We did take some pictures but not many as we went. I can tell you that we located the coax cable by measuring the distance from the driver side of the camper to the coax to the antenna and from the front cap to the same location. we then matched that up exactly on the passenger side and...

I did my install on Saturday and we drilled the roof where Heartland said (just opposite of the factory antenna). The coax cable was right there and we just had to install an end.

We have been looking at options but our Cyclone 4000 has a reclining sectional sofa as well as the reclining loveseat. The loveseat would be easy but the sectional will be more difficult as it has a portion of it that comes apart when you bring the slides in.

We have a 2014 cyclone 4000 and it's doing the same thing. Both sofas and even the trim on the windows is doing it. It's just flaking off and is awful. I would love to know what others are doing to resolve..

Hi. I have searched the forums for a while now and I cannot find this answer so I apologize if the answer is out there and I missed it. I have a 2014 Cyclone 4000 Toyhauler. I am preparing to install a Winegard Trav'ler system like many others have but before I go cutting my roof I wnat to...

Thanks everyone for your help. I replaced the 50AMP 12v breaker for the leveling system and immediately things started operating more normally. I also determined that while troubleshooting I had ran my battery too low so after putting a charge on the battery I had no further problems with...

I replaced the circuit breaker today and made sure everything was fitting tightly. The delays are no longer occurring like before so I can extend the landing gears, slides, etc.. without it turning off. Unfortunately, the auto level is still not working. It starts to work as before but...

Thanks guys. That makes sense to me-I had no idea those were actually breakers and not just some sort of distribution block. I went by Camping World and they did not have any nor did any of the local boat stores nearby. Of all places, Walmart had ONE so I picked it up. I'll order some...

So I think the problem is beyond just auto-leveling maybe. I was closing my slides yesterday and two different times the slides would not completely close. It pump would kick on to pull it in but pauses part of the way through it. I had to wait 15 seconds and then complete it. I had the same...

Yeah, I held it down but when I did so I would literally hear the pump kick on for 1.5 seconds and stop even while I held the button down. I am new to this leveling system but I read the manual, watched videos and the guy I got the coach from walked me thru the entire process a couple of times...

I am at the coach now and decided to try manually leveling the camper. front to back was no problem however side to side is giving me a similar issue to the auto-level. Once I had front to back level, the left side of the coach needed to come up about 1.9 degrees according to the LCI panel...

They suggested t me that I replace the control box at the front as well but I am hesitant to do so as it seems these things are somewhat flaky anyway. Do you recall the cost of replacing that unit? Did you get it from a dealer or directly from them? - - - Updated - - - I have a white box...

Thanks Dave. I actually did all those things and Lippert basically blew me off on a couple of calls. Thanks for the link.

I have a 2014 Cyclone 4000 with the 6-pont LCI auto-leveling system. The system was working fine just a couple of days ago but now it will not auto-level. Each time I attempt to auto-level the system starts by retracting the front jacks all the day and then it makes a few brief noises as if...