Search results

We are in the BH 9 to 10 months a year and stay 4 to 5 weeks for each job so I guess we are full timers. Thanks for the wisdom; I will keep shimming till we get a few weeks at home to go over it real good. Thanks Rex

We have aways carried some material to help level up; used to be 2 bys and 2 was to high and 1 wasent enough so we use 1/2" plywood cut into 12 inch squares works pretty good. I am thinking that before my next job, just change out with an up grade in the leaf springs. I think the OEMs are 3000#...

We have an 09 3670RL BH; recently repalce the leafs on the passanger side after the rear axel slid back on that side traveling through Thornton, Co . Broke that spring and other damage to running gear, shocks and stuff. Any way now we have to add 1 1/2" shim to level up on the side with 3...

Why do we always have to add at least a 1/2" shim on the same side every time we park, even on concret pads?

Re: Door repacement Thanks to all; looks like it is Tweetis for the a door and no special tools.

Who manufactured the entrance doors for the 09 BH 3670RL. Has any one replaced one; no special tool required I hope. It is those peskie right hand turns.

Well the welding was compleated to day. Joe Shunimen called this morning for me to have look at it, as I had requested that I would like to see it after disassembly. The call was after welding was compleated though; their dime and no slow down for them due to inspection. Asked if any NDE was...

Sorry for the delay in updating; we have removed every thing from the bedroom area and lower storage areas and are now in Hinton, Mo. pulling up to heartlands shop in Elkheart, In. Need to get it in the shop before my next job starts first of June in Port Arthur. These Pics were taken by the...

Update, Heartland response to dealer was if customer wants HL to cover he has to bring it to Elkheart and pick up when repairs are complete. Usually takes 10 days and no expenses are covered. Dealer is puting it back ot gather for the trip. Stormy weather here in Texas prevented a good visual...

We have a 2009 3670RL that has three (3) areas in the frame broken under the bed room. Dealer contacted heartland there resopnse was not under warrenty no help. Anyone else have this issue. Going over tomorrow and look at it myself really need to know if anyone else had had the frame material...

Who is the manufacture for the tall narrow back side windows on an 09 BH 3670RL. We have one that I can only raise a half inch unless I move the chair and get my legs under me; only get about 2 inches then. wondering if there is some adjustment I can do. all the others raise very easily above...

Thanks for the replies; I had purchased a product call reflectix at the local box store to use to black out the bed room windows as I am working nights on this job. Noted that the radiant heat was reduced in these windows and heard some stuff on the radio about radiant barriers. Thought I would...

MR Moderator help this may not be in the correct place. Has anyone tried or considered the application of a radiant barrier in their RV, and if so where would we install it. If this stuff is as good as I have heard on the radio may be Heartland should consider its use in their RVs. We are headed...

We have an 09 3670RL and it is sagging also, thing is that I carried it back to dealer while it was still covered, and all they did was put another door latch up on that side; pushed the area that had opened up on the side back up and caulked it again. It lasted from Houston to Tulsa. It is now...

Re: Thermo Cube Well wish I had read the whole post befor cominting on my freez up; really wished I had read this before wel left out in January. Hope to be back in Texas soon with enougt time to work on this and some other thins as well. Rex

The hot water froze up in the kitchen last April in Rawlins Wy. Central heat running; this morning hot and cold qater frozen in the kitchen in Tulsa Okla. thougth these were foru seasn down to zero in their test. In Rawlings it was cold but here it is in the upper teen eary this morning...

We have an 08 BH3670RL with a vented Splindide combo washer dryer. The wash cycle works well; the drying cycle works well but it always dumps a little watere into the drum at the end of the cycle. checked the trouble shooting guide in bacek of manuel and all is correct. Any one else have this...

Well sorry for the delay but this was touchus work, I have it back to gather. Six screws in the wall from original construction 2 of them had actually broken off from the fall. These were in the botttom next to the entertainment center. what I did was take a one inch wide scraper and slowely...

We have an 09 BH 3670rl; on our way back to Texas form Wyoming we pulled in to the lake whitney rv community and found the cabinet had fallen over. No molly bolt used here; no adhesive residue visible either. Any one else have this happen and how did you reattach. Open to suggestions. Rex

Thanks Tankie can't just chane out an appliance in an rv can we. We are in Rawlings, WY nothing here but a refinery and the Rail Road so I will wate till we get back to Texas. Glend loves that half time feature and uses more propane cooking now. thanks for the info.

We have a 09 BH 3670RL the appolo half time oven microwaves motor shaft has broken. Tried gluing it back with a 24 hour cure time but lasted only 3 days. Has any one else replace a motor or is it easier to replace the whoe unit?:confused:

Camping World in Katy (Houston) sales and finance great. service after the sale a 1. After a 6 month trip returned with a typed page listing items; they fiexd 1 item in a month and a half, and left a mess at that on the galley floor.

thanks Marv checking it now

We have some friends that saw our couch and air bed in our 09 3670 rl and we could not find a manufacture tag on it; who manufactures them. Thanks Rex:confused:

I have a 2100xc splendid washer/dryer combo and every time the drying cycle is done water dumps back in on the dry clothes. Does anyone else have this problem?

Same area but the tire is the root cause of my leaks. First time was right after picking our 09 BH 3670rl up. Got home no Propane; tire had worn a hole in the rubber line. Never unhooked carried it right back to the dealer and they repaced it. Happend again this August; I am guessing that a...

jcd8822, I suspect that it will fit like a glove. this one will be avaliable in late august or early sept, I am going to change out the pin box to a trailair when we get back home to Hempstead, Tx. There is a Big Country next door and another Big Horn down at the end of the row. Did't know that...

We picked up our BH there in Feb this year and nothing was said about a state inspection. We are in Wyoming now guess I'll check that out when we get back in Sept. R. Seale

Hello RIOF16, 1st Thanks for swerving so well. 2nd When we bought our 06 D3500 dealer said if we distrubed the eletrical system it would void the warrentty. Verify before cuttin into the harness. R. Seale I'm new to this forum to; lotta help here from what I have read.

N9MB The up and down is th worst part; sounds like we need to check out the trailair aftermarket when we get home. Thanks

Hey thanks for the information on air assist pin box; this forum has a ton of information in it. sure glad we found the address in the mfg data package for our BH. Thanks again

Has anyone installed an air assist pinbox, if so what type; yourself or do you recommend the dealer? Took deliver on a BH 3670RL in Feb 08 just after the Huston RV show. We have made 4 trips with the BH and is seems rougher than our first RV (05 wildcat 28 ft.) We pull with a 2006 D3500 HO...