Search results

Sorry for the delay in my response. My problem was solved and I didn't look back. To answer your question no I didn't have that response. When the tech showed up and turned my tstat to heat he heard a click but only once. I guess my hearing is going. He used a multi meter and the was no power to...

Re: Heater in my Bighorn not working Help Well the saga has ended.:-):-):-) the motherboard was bad. The tech suggested trying a surge protector . That might have been the cause. I learned a lot about how things work through this saga. Thank you all for the input. Call this case closed.

Re: Heater in my Bighorn not working Help Well i swapped tsats and no change. I crawled in the under belly and hooked the two blue wires together and it just clicked and that was it. I called a mobile service to come out and fix it. Thank you again for all your input

Re: Heater in my Bighorn not working Help Good morning guys let me say thank you for all your input. The water heater is working fine on 12V propane. When I try to engage the furnace nothing happens, the blower fan doesn't come on. Here is a pic of the Tstat. Yes I have another in master...

Re: Heater in my Bighorn not working Help Ok the saga continues . So I rechecked the out let side of converter it is 13.29 and with a load its 13.26. I pulled the fuse panel of wall and checked the input 13.28. I also put a load on fuse panel and pulled fuse from said fixture that was on and...

Re: Heater in my Bighorn not working Help My bad converter

Re: Heater in my Bighorn not working Help Dane you are correct on the 120 and 12.I have a meter and checked the reciprocal and then while inverter plugged in checked the outlet side. The inverter was slightly warm. I will check the fuse panel for proper voltage . Also when I pulled a fuse the...

Hello This is my first post so please bear with me. So my wife and I just bought a 2014 Bighorn. we have had it for a month and a half and my heater quit working. I was cleaning the trailer and wanted to make sure slides were open all the way, so i used the proper switch for the slides and when...