Search results

We love our 2009 and have had no major issues. Check the caulking and slide seals very closely. Sent from my iPhone using Tapatalk

We used the airbed for the first time last weekend for DW's good sized son. When he went to bed, it promptly collapsed in the middle. The tubular legs that form a two foot rectangle rocked back and allowed the middle of the bed to sag several inches. We ended up taking the air mattress off the...

Are there current plans to have one at the Tampa RV Supershow? We have friends who are very interested.

Jim, I'm not sure how to get water thru the black tank flush, since this is a connection that normally goes to the city water supply. Is there an internal fresh water connection to this?

Now that you mention it, mine squeaks too. I call the factory tomorrow. I guess I knew all along that I would need to do that. Thanks for the replies confirming.

The finish is beginning to come off of the faucet in our 3855 RL. Has anyone else encountered this?

I disconnected the wires and flipped the breaker back on and the vacuum still turned on. I then took a screwdriver and rapped sharply on the case near where the low voltage wires came out and tried it again and it did not come on. I then touched the wires together and it came on. I released them...

I've checked the two hose outlets, and they are ok. My next step, when it dries out around here and I can clear out an area in the basement to work, is to remove the wires from the vac, like suggested, and see if it still runs. I'll post when I find out if it still runs when they are off. Thanks...

We have the opposite problem. The vacuum will not shut off. We have to turn it off at the breaker. I (John) took the stair panel where the hose plugs in apart and disconnected the wires and it still does not shut off. Do the small wires to this unit go to a relay somewhere? Is it near the...

We are getting a small amount of water that appears on the bottom of the UDC. This is not a great problem, but we put a piece of cardboard with a slit in it to seal the hole that the city water hose and satellite cable come through, and it gets wet. When we open the door of the shower, there is...

The factory sent us a replacement that had white plastic instead of black. I got it on without a problem. All is well (for now). Thanks all for the help.

I don't think you will be able to unscrew the plastic without breaking it. You'll have to chip it out.

What kind did you use? I agree that there is so much back in there that entry should be made easier, if just to check and make sure everything is still tight.

Oops, I just noticed that the screws on the right side of the panel are screwed in from the docking station.

Also, your gauges are probably not telling you the truth. Ours says 2/3 full after a couple of days, then takes another week to say full. I'm still not sure how long we could go before it is really full. Other than waiting until the sink or shower won't drain, I'm not sure how else to tell how...

I (John) noticed a puddle of water on the floor of the basement, so we took everything out and I noticed that it looked like it was coming from behind the large panel, so I removed it. I saw that it was coming from the connection to the Hot Water Bypass Valve. When I move the hose connecting to...

New to forum and Heartland We attended the show Thursday and Friday and could not pass up the deal we got on a 2009 Big Horn 3385 RL. We are going to have someone drive it up to northern GA or western NC and put on a spot for us. That will be our northern home and we plan to still use our...