Search results

It does help and may change things a bit. I thought one of the white wires on term 3 was actually on term 6. I would still disconnect everything and individually test them. I am starting to think they may have plugged a wire into the wrong switch and the light switch is the problem. That is a...

that's my thought too. Here is the problem. That should be a positive 12v line coming into the bed tilt system, if that is the case, then why is the fuse not blowing as it is tieing the ground straight to a hot. OK, here's my thought. Let's start clarifying some things and make sure to call...

Sorry, I missed that line in your original post. I'm studying your photo. There is something definitely wrong. That is a DPDT switch. How are you with a voltmeter? We can figure this out if you want to. I attached a quick diagram of how it should be. It looks like there are 3 wires on the...

On the light switch, you probably have a HOT wire coming from your panel on one side. On the other side, you should have a wire going to the light. I am assuming there is a second wire on the light side going to the tilt switch(the blue wire from your photo). If this is the case, you can move...

I will try to snap a couple of photos, but I removed the 2 couches. I ran 2 C channel bars across the garage and bolted them to where the couches mounted. I strap my Kayaks to them. This gets them up and out of the way for day to day stuff and easy to lower them down and use them then needed...

Just bought a 2021 RW with a Furrion oven, F1S21L03A. The LED around the oven knob is red. Manual shows a fault code of a sensor problem and to contact dealer for service. Dealer said to call Furrion direct (of coarse), Furrion says the only way that happens is if it was wired up with...