Search results

Time for new tires on my trailer. Are Goodyear Endurance ST tires still the go to tire?

I have ordered two of the lippert 204758 hinges for my trailer. After contacting Lippert I was told these are the non friction hinges that are available for my 2021 Sundance. The friction hinges are nothing but a problem for my grandchildren when opening and closing the door. Hopefully the...

I received notice from Heartland the the propane regulator on my trailer may be part of a safety recall. I have read on another rv manufactures website that only certain regulator date codes were actually part of the recall. I contacted Heartland to verify the date code information and...

I found water leaking into the shower and also leaking out the exterior corner of the trailer under the shower. Since I was camping, I removed the shower valve and found the threaded connections on the back of the shower valve to be loose. I tightened them and that solved the leaking problem...

It's always hard to tell from a picture, but I see no major problems. I would take extremely fine emery cloth and lightly polish the areas where the inner bearing races set on the spindle and also the seal contact area on the back of the spindle. All you're trying to remove is the light...

I put in a wet bolt kit I purchased from Mor Ryde on my last trailer. It included bolts/nuts, shackles and bushings. Pretty straight forward, getting the trailer supported to do the work was a process. I did raise and complete the installation on just one side of the trailer at a time, worked...

On the suburban water heater in my Sundance the electric water heater switch is located behind the exterior cover. remove the cover and look in the lower left corner. It's tucked in behind other water heater components, so you have to really look for it.

Spacers may be the way to go. Even when the magnets do hold, the latch handle is touching the side of the trailer. Thanks for you're thoughts Bill

Just getting to know our new trailer, and have found I'm already tired of the outside storage compartment doors dropping and hitting me while I'm try to put in/take out things in the storage area. My assessment of the magnetic catches heartland is using is that they are a bad idea. I've...

This is the first trailer I've owned with a Suburban water heater. In my former trailers I've had Atwood water heaters with a drain valve installed. At the end of each trip I would just open the drain valve and drain the water heater. I did this to prevent water odor problems from occurring...

I finally got the Maxair vent covers installed. I did have to place a 1/4" thick aluminum shim on top of the vent brackets. This was done because the vents are installed on the crown of the roof, and without the shims when the vent cover to bracket bolts were tightened it cause the edge of the...

That's for the info. Now to get to work.

Just picked up our new Sundance 221RB. I plan on putting Maxair original vent covers on the roof vents, but am wondering how others have mounted the covers on the curved roof. It looks like some type of shims on top of the maxair brackets will be necessary. Any suggestions would be great...

Hello We picked up our Sundance 221RB a week ago. We're downsizing from a Jayco 5th wheel, but feel we're going to enjoy our Sundance as we explore Idaho and points west. Hoping for an early spring. Bill