Search results

I used clamps from the electrical trade that have a hole in the base that I bolted to the frame of the trailer and then it clamps around the pipeand tightened up with a 1/4 20 bolt.

That was one of the first things I checked.They are set right. What I had to do was put a jack under the slideout with a block and raise the slideout up about 1/16th of an inch and it would go in with the pump the rest of the way. I brought it out again and it did the same thing so I lifted it...

I have 2 batteries and it was hooked up to 110 volts. The bed slide went in fine. the dinning slide doesn't budge.

I am getting ready to go camping and I am cleaning up myBighorn3200rl. I opened up the slideouts to clean them and when I was done the bedroom slide went in ok but the dining room starts to go in thenit stops and all the lights go dim.Can you give me any ideas what is going on .thank you

water tank brace Tim K, great pictures and a very well built brace.

closet rod failure Sounds like a common problem. My first trip out I had the shelf come apart. I had the problem that they screwed into the panelling only and miss the pine. I made the repair and screwed into the pine with some bigger screws.It is holding but I want tomake it better at some time

I opened up the front storage area to put my batteries in and noticed hydraulic fluid all over the floor of the compartment. It appears that the fittings at the pump for the slide outs area leaking while the trailer was parked for the winter. They feel tight but they are still showing drips of...

sewer hose storage. I made up one out of 4"pvc and glued screw on end and fastened under my rig .I also installed to longer ones under there for my flagploe and my cleaning brush handle.

slide topper has anyone ever adjusted one . mine seem alittle loose when they are open.

I am using a prodigy with my Bighorn and it works great.the one they put in with the trailer worked alright but not as smooth as the prodigy.

under belly my dealer already cut my mine open before I even picked it up.They really hacked it up I have brought it back twice to have it repaired and they fix it the same way, with tape. every trip I make I am repairing tape. I will have to buy the material myself and do my own repair.

I pull a 3200RL with a F350 dually 4X4 and I have no problems with clearance most of the time. I had one time that I was in a rough terrain situation where the frame of my tonneau cover touched the bottom of my trailer.It didn't do any damage but it did get my attention.

When I went to the dealer to finalize the paperwork on my Bighorn he informed me it had arrived.It was a little different then I ordered but that was ok. I was checking it out when they were prepping it and noticed that the black plastic that is covering theunderneath on my trailer was cut up in...

yes I was surprised to see this model only lasted 1 year, I am hoping it is not a lemon .My biggest problem is I don't have alot of faith in the service department where I bought the unit. They cut up under my trailer in the prep work and did a terrible job of sealing it up.I took it back twice...

I found this site today.We own a 2005 Bighorn 3200RL.We bought it last April. We live in the northeast and have traveled around there.This past week we went to Daytona Fla. and back. This is our 3rd trailer and also our biggest. It pulled like it wasn't even there. I am looking forward to this...