MTPockets
Well-known member
Just ordered new entry door glass - a bronzed clear safety glass. Instead of that frosted glass, This allows us to see out the door glass and is a bronzed UV protected mirrored look from the outside.
I also added addt'l sewer hose storage across the frame under the steps.
We removed the cabinet over the sink in the bedroom to allow better head room and sink access, put mirrrors on that wall, a small storage shelf, and added a cabinet over the dresser (We don't have the Bedroom TV) Best Mod we made!
Moved the rear license plate bracket onto the rear bike rack so we would be legal by putting the rear license plate where it could be seen with the bikes on the rack.
Added plastic conduit over the electric brake wires that comes from the underbelly to the brake hubs. The wires were laying against the leaf springs so I felt this will eliminate chance of wearing the wire cover.
Applied plastic foam sealer to the areas on the underbelly where there were gaps along the frame; to keep out road debris, bugs, etc...
Installed 2 gal. water accumlator tank for constant pressure when using tank water; cycles pump less frequently.
Removed all six interior bullet light fixtures and replaced with better fixtures = better lights and easier to use.
Installed "Butch Bolt" onto Reese Hitch - In case Pin ever comes out; to keep from dropping onto truck bed(Who knows, it might come in handy some day)
I also added addt'l sewer hose storage across the frame under the steps.
We removed the cabinet over the sink in the bedroom to allow better head room and sink access, put mirrrors on that wall, a small storage shelf, and added a cabinet over the dresser (We don't have the Bedroom TV) Best Mod we made!
Moved the rear license plate bracket onto the rear bike rack so we would be legal by putting the rear license plate where it could be seen with the bikes on the rack.
Added plastic conduit over the electric brake wires that comes from the underbelly to the brake hubs. The wires were laying against the leaf springs so I felt this will eliminate chance of wearing the wire cover.
Applied plastic foam sealer to the areas on the underbelly where there were gaps along the frame; to keep out road debris, bugs, etc...
Installed 2 gal. water accumlator tank for constant pressure when using tank water; cycles pump less frequently.
Removed all six interior bullet light fixtures and replaced with better fixtures = better lights and easier to use.
Installed "Butch Bolt" onto Reese Hitch - In case Pin ever comes out; to keep from dropping onto truck bed(Who knows, it might come in handy some day)
When I receive mine I will probably make some of the same changes.
