Have a 2013 Big Country 5th. With a typical Anderson 4 Way Valve to control water intake.
Last camping trip at the sani-station I turned the valve switch on sanitize and absolutely no water flowed into the waste water tank. The valve switch turns hard on all settings and has since new. So, I turned the valve half way between sanitize and city water. Heard water flowing. Then turned valve half way between sanitize and normal and heard water flowing. It appears to me that the valve is not aligned properly with the feed into sanitize?
My concern is that there is slippage in the valve that will eventually affect the other settings?
Should I just replace the valve to be safe or could it be something inside that I could repair?
Water flow on other valve settings works fine for now.
Don
Last camping trip at the sani-station I turned the valve switch on sanitize and absolutely no water flowed into the waste water tank. The valve switch turns hard on all settings and has since new. So, I turned the valve half way between sanitize and city water. Heard water flowing. Then turned valve half way between sanitize and normal and heard water flowing. It appears to me that the valve is not aligned properly with the feed into sanitize?
My concern is that there is slippage in the valve that will eventually affect the other settings?
Should I just replace the valve to be safe or could it be something inside that I could repair?
Water flow on other valve settings works fine for now.
Don