Bedroom slide won.t move
- Thread starter billhealy
- Start date
danemayer
Well-known member
Hi billhealy,
First thing to check is your fuse box. If you hold the button to move the slide, a blown fuse will be indicated by an illuminated red LED next to one of the fuses. But you have to hold the button down for the light to come on.
If no light, check under the bed to see if maybe a wire nut has come off or the wires have worked their way out.
First thing to check is your fuse box. If you hold the button to move the slide, a blown fuse will be indicated by an illuminated red LED next to one of the fuses. But you have to hold the button down for the light to come on.
If no light, check under the bed to see if maybe a wire nut has come off or the wires have worked their way out.
Jesstruckn/Jesstalkn
Well-known member
Did you say there is power at the motor ??
With switch pressed of course !!!
If you do have power there but the motor quit on you, then you can, first try tapping on the motor with a hammer or something solid like that.
Or have a few if possible give it a good push from outside while holding the switch to in position. That might get it moving again.
Hope this helps
Jerrod
Sent from my XT1585 using Tapatalk
With switch pressed of course !!!
If you do have power there but the motor quit on you, then you can, first try tapping on the motor with a hammer or something solid like that.
Or have a few if possible give it a good push from outside while holding the switch to in position. That might get it moving again.
Hope this helps
Jerrod
Sent from my XT1585 using Tapatalk
