Bigfoot level up questions?

[Nbomar]

I am looking at adding a leveling system to my 2015 Road Warrior 415. I know I want a 6 point. My question is since I already have 2 front hydraulic legs, do I buy a 4 point?

I've been thinking about doing the Bigfoot because of the self contained pumps. I already have the horrible 50a breaker issue and it usually cycles 2-3 times to raise or lower the legs and also to put the slides in or out. I don't want to add anymore stress to this breaker. Any help or input would be appreciated. I checked with lippert and they have no new information on their self contained leveling setup.


Sent from my iPhone using Tapatalk

 

[Sniper]

I am looking at adding a leveling system to my 2015 Road Warrior 415. I know I want a 6 point. My question is since I already have 2 front hydraulic legs, do I buy a 4 point?

I've been thinking about doing the Bigfoot because of the self contained pumps. I already have the horrible 50a breaker issue and it usually cycles 2-3 times to raise or lower the legs and also to put the slides in or out. I don't want to add anymore stress to this breaker. Any help or input would be appreciated. I checked with lippert and they have no new information on their self contained leveling setup.


Sent from my iPhone using Tapatalk

We had the BigFoot 6 point auto level system installed on our 3010 Cyclone. The front legs will be replaced as well. The center legs are jumped from the rear. You can view the system installed on ours here https://heartlandowners.org/showthread.php/53549-Our-3010-Modifications/page4 We absolutely love ours. If you have any questions I may be able to answer please feel free to do so.

Safe travels.

 

[Nbomar]

How much was your 6 point installed sniper?


Sent from my iPhone using Tapatalk

 

[Sniper]

How much was your 6 point installed sniper?


Sent from my iPhone using Tapatalk

It wasn't cheap! LOL Cost of the system + 24 hours labor if I remember right, but worth every penny at least to us. They had to remove and notch all the J-Wrap and weld mounting brackets to the frame. http://thebigfootleveler.com/ If you are close to one of their installers http://thebigfootleveler.com/Find_your_local_Dealer_.html you may be able to get it installed for less labor. Ours was the first BigFoot install our dealer had ever done.

 

[Sniper]

It wasn't cheap! LOL Cost of the system + 24 hours labor if I remember right, but worth every penny at least to us. They had to remove and notch all the J-Wrap and weld mounting brackets to the frame. http://thebigfootleveler.com/ If you are close to one of their installers http://thebigfootleveler.com/Find_your_local_Dealer_.html you may be able to get it installed for less labor. Ours was the first BigFoot install our dealer had ever done.

I forgot to mention there was also a "heavy freight" charge for shipping as well.