When I remove the hose after flushing the black tank, clean water comes out of the connection. I then put in the rubber plug but there continues to be some leakage from the connection. Is this normal? If not, how can it be corrected?
I have a 2006 3500 and it does the same thing. I think it is because you hook up a garden hose with a lot of pressure to a flush valve that has small outlet holes to cause a good spray to clean the tank. When you shut off the water and undo the hose, you have some pressure built up and it releases at disconnect.
My guess is it's the water remaining in the hose up to the point where the anti-siphon valve is. It just flows back out the connection. There is no check valve at the connection.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.