forbesclan
Member
My 2011 Cyclone 3800 got a little too close a low hanging tree. As a result I have some repairs to do. Does anyone have a good resourse for repair methods and the best materials to use?
Rubber Roof Repair
- Thread starter forbesclan
- Start date
-
- Tags
- roof
JohnDar
Prolifically Gabby Member
Depending on how severe the damage is, you could cover and seal tears with Eternabond tape. It comes in several widths.
I had a similar situation a few years back. I bought a roll of Eternabond and taped up the area where to tree jumped onto my roof.
Been holding strong for about four years.
I always meant to apply some Dicor self leveling caulk for good measure but never got around to it. Looks like it didn't need it. Eternabond is still holding firm.
Of course this all depends on the severity of your damage.
Peace
Dave
Been holding strong for about four years.
I always meant to apply some Dicor self leveling caulk for good measure but never got around to it. Looks like it didn't need it. Eternabond is still holding firm.
Of course this all depends on the severity of your damage.
Peace
Dave
forbesclan
Member
Thanks for the advice, I will order a roll, do the repairs and keep some on hand.
