slide facia

[LAZYGRANCH]

NoneCan you advise me on how the facia on the large slide of the 34rl Big Horn is attached?? is it nailed or are there screws somewhere--I need to raise the roof and hopefully the ceiling--I am pretty handy and have air stapler with 1 and 2" nails. I can't afford to have a repair shop do this--Thank You

 

[kakampers]

The fascia is basically "stapled" with an air-nailer. They are small, square nails with a "t" shaped head. You should be able to carefully remove it and then re-nail when you're done. Good Luck!

 

[Oldlthrneck]

Just like ken said, they are put on with what is commonly referred to as, "pin nails". I am sure they used an air driven pin nailer to attach it to the slide out.
Fred

 

[LAZYGRANCH]

Thank You--I appreciate the help--I have to do this now as my slide will not pull in on the non-ram side--it's wedged on the top due to the drop in the ceiling--again Thanks