jim_killick
Member
I have a 2007 sundance, 2900MK, on the dinning side slide, the lights do not work, no power to the light switch, is there a electrical schematic available so that I can try to trace the wiring?
Sundance - slide light wiring problem.
- Thread starter jim_killick
- Start date
jimtoo
Moderator
Re: ATF: Sundance - schematic
Hi Jim,
No,, there are not schematics avaliable, but most of the forum members will jump in and help solve your problem.
Since it's in the slide, look outside underneath. At one of the corners you should find an electrical box with wiring going in, remove cover and check there first for loose connections and/or bad connections. Check for voltage also. If no voltage and connections good, then go to fuse panel and check back side for loose wiring. Also make sure your not plugged into 120v incase you get the box for the wall plugs, if there are any in the slide.
I am moving the thread to another area where you should get better and more information from someone besides just me.
Let us know what you find.
Jim M
Hi Jim,
No,, there are not schematics avaliable, but most of the forum members will jump in and help solve your problem.
Since it's in the slide, look outside underneath. At one of the corners you should find an electrical box with wiring going in, remove cover and check there first for loose connections and/or bad connections. Check for voltage also. If no voltage and connections good, then go to fuse panel and check back side for loose wiring. Also make sure your not plugged into 120v incase you get the box for the wall plugs, if there are any in the slide.
I am moving the thread to another area where you should get better and more information from someone besides just me.
Let us know what you find.
Jim M
