Latest activity
-
explorer2316 replied to the thread Cinco de Mayo - "Cinco".Well folks a BIG THANKS to all who attended this year and in years past and made this event a success. Sue and I genuinely enjoyed the... -
LMelvin replied to the thread RV Miles report About Heartland on You Tube very Disturbing.We would like to directly address recent rumors and reports surrounding the future of Heartland RVs. We can confidently say that... -
wdk450 replied to the thread Landing Gear Crank Cover Replacement.I have a 2008, but can't imagine finding parts specific to this 17 year old RV any more. The landing gear switches should be pretty... -
Ddavid-steph2018 replied to the thread Landing Gear Crank Cover Replacement.Yea, good luck with that!!!! Maybe design something to attach to where you could use a drill to help. Something like a socket with a rod...
-
NQuestion: Having just had the Vroom Slide System installed on our BC3560SS, there is a safety feature if you will that allows you to...
-
TerribleTim68 replied to the thread Landing Gear Crank Cover Replacement.Wow, I can't imagine trying to crank those with a slot screwdriver with the weight of the trailer on them. :oops: -
TerribleTim68 reacted to david-steph2018's post in the thread Landing Gear Crank Cover Replacement with
Like.
Also to keep rain out for now, clear Gorilla Tape will work -
Ddavid-steph2018 replied to the thread Landing Gear Crank Cover Replacement.Also to keep rain out for now, clear Gorilla Tape will work
-
Ddavid-steph2018 replied to the thread Landing Gear Crank Cover Replacement.Here is a manual for the system: https://ultra-fab.com/wp-content/uploads/2018/07/5th-Wheel-Jack-Instructions-11-30-17.pdf Look on page...
-
TerribleTim68 replied to the thread Landing Gear Crank Cover Replacement.They must have, and that's the crank I have in my storage box that came with the unit. But mine has clearly been swapped out for the...
-
So I'm wondering if a previous owner changed out the landing gear. The holes you show seem consistent with a Lippert landing gear. The...
-
Bogie replied to the thread Landing Gear Crank Cover Replacement.So I'm wondering if a previous owner changed out the landing gear. The holes you show seem consistent with a Lippert landing gear. The... -
-
TerribleTim68 replied to the thread Landing Gear Crank Cover Replacement.Yeah, this one clearly does not have the cross-shaft connecting the two motors. It would be visible inside the generator area, where I...
-
TerribleTim68 reacted to david-steph2018's post in the thread Landing Gear Crank Cover Replacement with Like.
Look in the hole, you may have a shaft with a notch in the end that the crank slips over. Usually there is the crank on one side, but it...
-
Ddavid-steph2018 replied to the thread Landing Gear Crank Cover Replacement.Look in the hole, you may have a shaft with a notch in the end that the crank slips over. Usually there is the crank on one side, but it...
-
TerribleTim68 replied to the thread Landing Gear Crank Cover Replacement.Here you go, each leg has a separate electric motor on top of the leg - I can't imagine that matters to the port trim piece I'm now...
-
-
Ddavid-steph2018 replied to the thread Landing Gear Crank Cover Replacement.What type of landing gear system does the rig have installed. The crank can also be used to the slides. Post a pic of the landing gear.
-
TerribleTim68 posted the thread Landing Gear Crank Cover Replacement in Frame / Landing, Leveling & Stabilizing Gear.Hey gang, I have a 2008 Cyclone 4012 and it has ports for the "emergency landing gear crank" on each side. Those ports had a "cover" in...
-
-
Dahillbilly replied to the thread Slide issues.working in only one direction, could be as simple as a loose wire from switch to the motor or relay switch. Check for loose wire on... -
Bogie replied to the thread Slide issues.Which slide are you talking about? Main room or bedroom? Looks like the bedroom slide might be a Schwintek. Also is main room slide...
-
Ddavid-steph2018 replied to the thread MPG 181 water heater not heating properly.If you have an outside shower, make sure the water is off at the HANDLES, not the push button.
-
Ddavid-steph2018 replied to the thread Slide issues.Look around the batteries for a small 12VDC breakers. You will need to feel the side of these for a small reset button. The 12VDC...
-
wdk450 replied to the thread Slide issues.I am assuming you have the Lippert hydraulic slideout system. Have you tried using the auxiliary outside switch located on the hydraulic...
-
cookie replied to the thread MPG 181 water heater not heating properly.The one thing that is pretty common with the symptoms you describe is that there could be both hot and cold shower turned on at the... -
mrcomer reacted to chaplady's post in the thread RV Miles report About Heartland on You Tube very Disturbing with Like.
The owners club was the driver for us staying with a Heartland product through 3 purchases. Without the people that made up the club is...
