Several of us have mounted the cover over the 5th Airborne pin. You have to cut a couple of strips off each side and it fits perfectly. Can post a photo if you need to see it.
Several of us have mounted the cover over the 5th Airborne pin. You have to cut a couple of strips off each side and it fits perfectly. Can post a photo if you need to see it.
Yes, if you would. I've pretty much decided to go with the 5th Airborne on my rig. Probably order it later this month and put it on myself once it warms up.
Looks like all you had to do was cut that sharper angle at the rear of the fairing, right? If so, that would cut out the little crack I have at the back edge of mine. What did you cut that with?
Hmmm. The faring on my Elk Ridge was too short, once the 5th Airborne was installed. Looking at the old pics, maybe it wasn't the same size faring as I see here.
Actually cut it with the stock pinbox so it would clear the bedrails. I didn't do a thing to it for the 5thA/B. I originally cut it with a pair of tin snips and it worked fine. Put two screws in the rear sides each and put two self tappers into the 5th A/B to hold it up front as you see in the pic.
Actually cut it with the stock pinbox so it would clear the bedrails. I didn't do a thing to it for the 5thA/B. I originally cut it with a pair of tin snips and it worked fine. Put two screws in the rear sides each and put two self tappers into the 5th A/B to hold it up front as you see in the pic.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.