After getting an occasional "different" smell in one area of the trailer I put it off as a dead varmint somewhere near the area. Well, that isn't the case. I got up yesterday morning to find the critter or whatever is was and found a very slight leak on a very hard to get to black tank outlet in the bowels of the 3670.
The drip, once every 82 seconds, is right at the exit port of the tank where the valve slides into it. It has a band clamp on it and I was able to tighten it just a smidgeon but with no success, still dripping. So I guess what I'm asking is, have any of you had the valves out of the outlet port and what if anything seals the two? How does a band clamp tighten up on an ABS fitting and an plastic tank.
I really can't do anything major now, but intend to fix this properly when back home at the shop where all the tools and a nice concrete floor are available.
Thanks
The drip, once every 82 seconds, is right at the exit port of the tank where the valve slides into it. It has a band clamp on it and I was able to tighten it just a smidgeon but with no success, still dripping. So I guess what I'm asking is, have any of you had the valves out of the outlet port and what if anything seals the two? How does a band clamp tighten up on an ABS fitting and an plastic tank.
I really can't do anything major now, but intend to fix this properly when back home at the shop where all the tools and a nice concrete floor are available.
Thanks