PDA

View Full Version : Washer/Dryer



Mike Sparks
04-15-2011, 04:08 PM
I have a 2008 Augusta that has the stacked washer and dryer. Washer needs to come out for repair. Since the washer measures 23 and 1/2 inches wide and the doors in the bedroom are 22 and 5/8 inches wide is there a secret to get the washer out? Wondering if the slide out has to pulled to get these units in and out? :eek: Any help is greatly appreciated.

Have read your post and appreciate the input. Here is some more info: All doors are pocket doors. So will go back to measuring. More to follow.

JohnDar
04-15-2011, 04:23 PM
If it's a hinged bedroom door, what about removing it from the frame?. Maybe even removing the frame? Having to remove the bedroom slide to get it out sounds a little extreme and sure to make the repair of the W/D very expensive.

danemayer
04-15-2011, 06:34 PM
Just a guess - is the depth of the washer a bit less? Maybe it goes out the door sideways.

hoefler
04-15-2011, 06:41 PM
Just a guess - is the depth of the washer a bit less? Maybe it goes out the door sideways.


That would be my guess, most appliances are narrower front to back than side to side.

letourno
04-15-2011, 07:02 PM
12700Actually, if it is a Splendide, it is 22 and 5 eights... Here are the specs taken from their website. You would only have to take the door off its hinges... Good luck!