ATF: Bighorn - slide adjustment

I have a 2007 big horn and installed the aluminun angle on the slide edges. Now i am concerned about the aluminum rubing on the carpet under the couch slide. can a adjustmen be made to correct this problem.

zurn

Re: ATF: Bighorn - slide adjustmen

The rollers raise the slide up as it is brought in. You shouldn't have any problem with the aluminum dragging on the floor. I have installed the aluminum on or rig and don't have any issues with it.

zurn, If you used 1/16th thick angle and countersunk screws you should be fine. If any screw heads are above the surface of the aluminum, they might be a problem. As long as everything is smooth, it'll be good to go...