PDA

View Full Version : Television antenna



Jimmyt5
06-04-2007, 03:23 PM
The shaft on my tv antenna seems to be short, If you put the crank on like it should be you can not pull down the rotate big ring, if you fix it so the ring will come down then the crank falls off. Just seems like the shaft is to short.
Anyone have any ideas??? Tks Jim

jbeletti
06-04-2007, 03:37 PM
Jim,

Are you speaking of the crank on the satellite antenna or the over-the-air antenna?

I recall that when I installed my crank up satellite antenna, that I had to use a hack saw to cut the shaft to the proper length.

My satellite antenna is Winegard. Same as the over-the-air antennas. My guess is that the installation is similar. The shaft is likely available from Winegard as a replacement part. If your unit is under warranty, I'd ask your dealer to take care of it.

Jim

Jimmyt5
06-04-2007, 08:15 PM
I am talking about the over the air antenna. Mine is not a Wingard (too bad) it is Antenna Tek.
I am going to give it to the dealer, was just trying to fix before I went back.

jbeletti
06-04-2007, 08:56 PM
I see. I didn't know that Heartland used another brand in some models.

For any who need it, here's a link (http://www.antennatek.com/antenna.html) to Antenna Tek.

Jim

Jimmyt5
06-05-2007, 08:24 AM
Thanks for the link, that is a big help......
Jim

billyk21
06-06-2007, 06:42 AM
I had the same problem with a previous trailer, and I believe Camping World sells an extension for the crank up.

Bill and Renee' Kaufman
2008 3370 Bighorn