Been traveling a couple weeks and started off fine making hot water using electric,until one evening last week when we tripped a breaker because wife had 2 curling irons plugged in. Reset and everything works except hot water. Using propane to heat the water.
Have checked all the switches I know of and one by one pulled every fuse and all are good.
The switch for the electric still lights up like it's working but water doesn't heat, I checked for voltage at the electrode and can't find any. I just replaced the electrode last Fall and haven't turned it on w/o water in tank. Is there another fuse or breaker that I haven't found? Not sure where else to look, and I would be surprised if the element is bad again.
Have checked all the switches I know of and one by one pulled every fuse and all are good.
The switch for the electric still lights up like it's working but water doesn't heat, I checked for voltage at the electrode and can't find any. I just replaced the electrode last Fall and haven't turned it on w/o water in tank. Is there another fuse or breaker that I haven't found? Not sure where else to look, and I would be surprised if the element is bad again.