beasleyrl
Well-known member
Last weekend, as I was flushing the tank, my wife yelled to me that there was a leak in the trailer coming from under the steps to the MBR. Today, I decided to look closer. It appears that when I connect the flush line and turn it on, there is a leak under the bathroom. I traced the red line from the connection point in the docking station (from the flush connection) to underneath around the power distribution. From there, it appears to go up into the "roof" (or floor depending on how you look at it). Then, it comes back down into the tank area. This doesn't make any sense to me. Why would it go up and then back down? There is another line to the toilet so I don't see why it would go up to that but it is the only thing I can see that might have water going to it (even though this flush water line shouldn't go there).
Bottom line, there appears to be a leak somewhere around where it goes through the roof/floor. Great place to have a leak - right above all the electrical stuff... Any ideas how to fix it or why it goes up that way?
Also, while I was in there, I noticed another water line that was not connected. Turns out, it was what appears to be an overflow line for the the fresh water tank. Guess I'm glad I really haven't put too much water in that...
Bottom line, there appears to be a leak somewhere around where it goes through the roof/floor. Great place to have a leak - right above all the electrical stuff... Any ideas how to fix it or why it goes up that way?
Also, while I was in there, I noticed another water line that was not connected. Turns out, it was what appears to be an overflow line for the the fresh water tank. Guess I'm glad I really haven't put too much water in that...