Recent content by Al.K

Spend some time unhurried in each floor plan at a show, or dealer if possible. That's what we did a few times. And the floor plan of your choice will come to you. That's how we chose the 3010RE. For all of the positive reasons you outlined. And you adjust the other things to your liking. You can...

Look around at the foot of the hide a bed frame. Ours has the storage bag attached on that end of the support material.Its on top and folds in with the frame when closing.

Look above the control panel. On our 2014 3010RE there is a panel held by a few screws. Hard to see at first. Take the screws out and the panel will slide out. You will have full access to the circuit board and the reset button. Also make sure your remote is charged. It holds the memory for the...

How much Rejex does it take to do an average size fifth wheel?

Sorry to hear your having problems with the link system. We had the same problem with our 2014 Bighorn, not long after purchase. Tried everything I could on my own, as you have. There is information on the Lippert web sit on how to reconnect the remote. There is a black button on the board. Hold...

What do the stains look like. My Sister In Law bought a Sundance in that year range. And they found some green stains around their A/C units. Could this be the same problem? Dealer told the no problems found. And their A/C sill works well, I believe.

After taking a look at my suspension. The bolts that go through the spring eyes on the ends with the Correct Track have the head of the bolt spot welded to the cam plate. So I think I'm seeing why Dexter would question the use of their wet bolt for this application. Maybe I could use the upgrade...

I have been researching the suspension threads. And trying to follow along with the wet bolt vs never fail bushing topics. It appears I have a mix of part from Dexter and Lippert involved, and my question is-If you switch to a wet bolt set up, and you have Correct Track. Can you use the same wet...

After having my microwave repaired this week. And dropping it from its mount, to access the screws on the top. I can share this information. The back of the microwave sits against some foil type flashing/sealing tape around the inside of the opening in the wall. So the problem I would see is...

Update to our microwave story. Called Heartland, and they took our all our info on Wednesday. By Friday Frigidaire called to tell us they were shipping the repair part to us, and wanting to schedule a technician. Repairman came out an replaced the keypad, and all is well. All at no cost to us...

We are on our first trip this year. Arrived at our destination campground, to find our Frigidaire convection microwave is not working. It has power and the light works inside. But the control panel/buttons don't work. It's like the control panel is locked up. Called Frigidaire they said there is...

Had the same issue with our 2014 3010RE. Its more an issue of understanding how the vent works. You have to push up and out at the bottom of the outside flap. I had to call Heartland to have a tech explain it to me. I was like you, I thought for sure I was going to break it. In my case I have to...

I tried everything I could on my own. Called Lippert, tried to resync. My dealer gave me another remote to try. Nothing worked. I took the coach back to the dealer and they are still waiting on a replacement brain/circuit board to replace the original. We have them addressing a few other small...

Called Heartland, and got more info on finding the brain to the linc system and the access panel. After trying the grill/vent cover I found ours in the same cabinet/cupboard as the switch panel. There is a piece of the paneling, held on by two screws. Tried the reset, but nothing. I did check...

Called Heartland. They verified the receiver should be on the back side of the panel with all of the manual switches. Pulled the panel, but found nothing but wiring for the switches. Called Lippert, and they want me to take it to any repair facility of my choice. The remote looks like its OK...