david-steph2018's latest activity
-
Ddavid-steph2018 replied to the thread 2016 3150rl tanks.One way to find out which tank a drain is connected to, is to use food coloring. Mix up about 4-5 gallons of color and dump down a...
-
Ddavid-steph2018 replied to the thread Inverter transfer switch part help with pics (Molex connector).Glad you got it working
-
Ddavid-steph2018 replied to the thread Fender repair help/ideas.When mine cracked, I replaced them with aluminum fender flares I found at Bontrager's for $25/each. https://bontragers.com/ If you...
-
Ddavid-steph2018 replied to the thread Milestone Plumbing Question.So, rules out any modifications by another owner.
-
Ddavid-steph2018 replied to the thread Milestone Plumbing Question.Did you buy the rig new?
-
Ddavid-steph2018 replied to the thread Milestone Plumbing Question.The shower usually drains into a different tank. How did you find out it drained into the black tank?
-
Ddavid-steph2018 replied to the thread Is it ok to travel with tanks somewhat full ?.We travel with a full fresh tank, plus whatever we put in the other tanks when we are traveling. You will be surprised; there are...
-
Ddavid-steph2018 replied to the thread Exhaust fan in roof.In our Road Warrior, there is a switch in the control center for the kitchen ceiling fan.
-
Ddavid-steph2018 replied to the thread Tv size for outside area on a 371.Is it going to go inside a compartment? Are you plan on hanging the TV on the outside of rig, and remove for travel? Maybe a photo of...
-
Ddavid-steph2018 replied to the thread Black water tanks (2) plumbed together.How will solids get back there? Fluids, yes, but with fluids leaving the main tank, it can create poop pyramid issues in the main tank...
-
Ddavid-steph2018 replied to the thread Cyclone - Compartment Slam Latches.Sorry we have a different style. Our style is a metal insert in the jam. But I found this one, it may be what you need...
-
Ddavid-steph2018 replied to the thread Cyclone - Compartment Slam Latches.Post a pic, I may have one.
-
Ddavid-steph2018 replied to the thread Residential refrigerator.From people I know with the island, if they want to move the fridge out, the island needs to come out or at least moved to the side first.
-
Ddavid-steph2018 replied to the thread Gen Y gooseneck.Here is one Lippert approves: https://www.lippert.com/gooseneck-connect-21k-2020043670
-
Ddavid-steph2018 replied to the thread Gen Y gooseneck.CW will probably say it is your responsibility to check to make sure what you buy will work on your rig.
-
Ddavid-steph2018 replied to the thread Bighorn Electrical Issues.I don't understand how a storm could dislocate the sewer to the black tank. If there was a lightning strike, it would have damaged the...
-
Ddavid-steph2018 replied to the thread Gen Y gooseneck.Suggestions to proceed on what, the hitch? If it is not approved by Lippert, then any damage to the frame will not be covered...
-
Ddavid-steph2018 replied to the thread Residential refrigerator.On our Road Warrior in the front feet have 2 wood screws, one on each side. Then across the top is a board that is screwed to the wood...
-
Ddavid-steph2018 replied to the thread Garage ht in 2020 371.We used to have a gas power golf cart with the lift kit. It did fit in our 2018 Road Warrior, but not much room to spare.
-
Ddavid-steph2018 replied to the thread Suspension.Yes, we broke a spring hangar on our 2018 Road Warrior in 2020. We were in Goshen at the Fairgrounds and broke the right rear hangar.
-
Ddavid-steph2018 replied to the thread Lithium battery.On our 2018 Road Warrior, we had to change out our converter.
-
Ddavid-steph2018 replied to the thread Awning gas struts.Give this company a call and see what they can do with the number you have...
-
Ddavid-steph2018 replied to the thread Inverter transfer switch part help with pics (Molex connector).Why 2 connectors? Simple power in & power out. You take the power line from the breaker box break it in half. The side from the breaker...
-
Ddavid-steph2018 replied to the thread Inverter transfer switch part help with pics (Molex connector).Okay without the connectors, just run the wiring into the transfer switch and connect. Take photo before you disconnect anything in the...
-
Ddavid-steph2018 replied to the thread Inverter transfer switch part help with pics (Molex connector).Read the details on each switch and see if they match. If both are 15amp, they should be interchangeable.