Recent content by Mase

Thanks to all who responded. It is apparent that the Levelease manufacturer is out of business. The system has been sold to Intellijacks, a European company that sells sneakers and sunglasses, but it is not certain if they will continue to manufacture this product. It is a pretty neat system...

Can be a 3500# or 5000# model.

The 2010 Bighorn 3670RL that we bought last year had a Levelease (same as Intellijack system). It has been operating sporadically and sometimes starts to smoke while I am lifting the RV. I took the cover off. There is a circuit board underneath. At about the center of the board is a black...

So, what you are saying is that you have the same exact situation in the basement of your 2011 as in my 2010 and that you removed the basement wall I referred to and installed the EMS unit there? I will check that out when I am in a position to empty my basement. I will look for the cavity...

Yes, I did remove enough of the coroplast bolts to drop the rear of the coroplast and determined that my hitch installer will have access to the I-beam frame on the inside. I removed the end panels on the outside of the I-beam which I can see will allow him access to both sides of the I-beam...

Great ideas. Thanks! - - - Updated - - - Sheesh.....and I thought this was going to be simple - my bad.

I just bought my 2010 Bighorn. The sound system is terrible. There is a Pioneer receiver amp, which is probably good, but the little factory speakers are terrible. The amp allows for a number of different sound modes. Some work OK until the volume is raised and others completely distort at...

Looking for a used Trailer Toad. Can be a 3500 or a 5000. Present location is southern Arizona and will be Pollock Pines in March or April.

I had mine manufactured and installed by KSH Marine, in Lake Havasu. They usually have a booth in the Big Tent in Quartzsite, in mid January. What I liked about KSH is that they customize the tank to your exact requirements. I already had a diamond plate tool box in the bed. I asked KSH to...

I appreciate all of the suggestions on a different location for the EMS. I am new to the RV and coming from a toyhauler, we packed everything we could into every available space when we moved from the old to the new. My basement is jammed packed from floor to ceiling, so I don't know what is...

Thanks alot for the useful info. I now have my first homework assignment. Will let you know what I find - after I recover from the holidays - ha!

I had one of these units in my old 30 amp 5er and it saved me on many occasions when there were park related electrical problems. I am going to buy one for my 2010 3670 RL. They are pretty simple to install. Cut the electrical supply cable BEFORE THE FUSE PANEL and attach the incoming power...

The hitch is a Curt 13703, Class III, made specifically for trailer/5th wheel installations. There are two heavy plates that bolt to the inside surface of the I-beam frame on each side. 4 bolts go into the side of the I-beam and 2 bolts go into the lower lip of the I-beam. This hitch is being...

We took possession of our 2010 3670RL on Dec. 2, 2016. I am a full-timer and have been at a full hook-up campground since then, so I haven't used the 12 volt water system system yet. Today, I noticed water dripping from a small hole in the chloroplast under the basement area, which was very...

Does anyone know what is under the plastic sheeting that covers the undercarriage at the rear of the RV? I am having a Curt 13703 hitch installed on the rear of my 2010 Bighorn 3670RL. I am wondering what problems I will encounter. I will need access to both sides of the I-beam to bolt the...