BTW porthole, you were right. The switch is a 6- terminal not a four. I thought was a 4 because that's how many wires were going into the wrapping.
Sent from my iPad using Tapatalk HD
I have the 2012 Cyclone 3110 and my front jacks aren't working. I had this problem last week and thought it was resolved by replacing my batteries. It was temporarily resolved but I now have the same problem:
My slide-outs and the rest of the hydraulic systems seem to be working fine. When I...
ISSUE RESOLVED.
The problem ended up being that my batteries were low. When this problem first occurred my lights were working, and the hydraulics for my slide-outs also worked - so I was not suspecting the batteries initially. But the next day they were totally dead. They were still under...
Thanks for the suggestions. Would I be able to find a replacement switch at any hardware store, or would this be a specialty item that I would have to order?
Sent from my iPad using Tapatalk HD
I'm trying to hitch my Cyclone 3110 and my hydraulic front jacks stopped working. The slide outs are working fine. When I push the button to extend I'm hearing a click. Help!
Sent from my iPad using Tapatalk HD
I couldn't find an 80 amp, so I replaced it with the 50. The slide outs worked perfectly - no stalling. Regardless of amperage size, at least I know the problem.
Thanks everyone for your expertise!
Sent from my iPad using Tapatalk
I followed the wires. If these things are cheap, I'll buy both. If I run into problems with the 50, then I'll try the 80.
Thanks everyone!
Sent from my iPad using Tapatalk HD
Thanks everyone. I'll try to drill them out, then replace all of them with slightly larger and longer galvanized screw. Hopefully this will take care of the issue.
Sent from my iPad using Tapatalk HD
Does anyone have any ideas on how to remove these screws? The heads broke off and the studs are still in the wall. FYI, these are my ladder screws.
Re: 2013 Cyclone 3110.
Sent from my iPad using Tapatalk HD
The same thing happened happened to us traveling from Phoenix to Newport Beach last Wednesday. We lost the left rear tire traveling on the I10 going no faster than 60 mph. My Cyclone is less than a year old. It did some damage to panel and fender. Fortunately we were able to get the tire fixed...
I understand that you did not ask this question, but I thought I would suggest something helpful regarding the screen: I have the 3010 so I hope what I'm suggesting applies.
Our garage screen has a strap that we pull the screen down with. In our model there is the garage tool box within close...
The premise is that you would hope most people would do their homework before purchasing a tow vehicle (as you are). So if you believe the premise (as I do) and consider that a highway would be a random sample of tow vehicles then actually this method would carry some empirical credibility...
Agree. I have a 2012 3110 Cyclone and pull it with a 2012 Ram 3500. The difference between the 3/4 ton and the full ton is basically springs in the back. Remember that torque is not the only issue: think about the braking capacity. I'm not sure about the Chevy, but the Ram has multiple slowing...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.