Search results

Thanks everyone. I called a guy who is going to come out and help me tomorrow. Hopefully it will be a simple fix. Sent from my iPad using Tapatalk HD

BTW porthole, you were right. The switch is a 6- terminal not a four. I thought was a 4 because that's how many wires were going into the wrapping. Sent from my iPad using Tapatalk HD

I have the 2012 Cyclone 3110 and my front jacks aren't working. I had this problem last week and thought it was resolved by replacing my batteries. It was temporarily resolved but I now have the same problem: My slide-outs and the rest of the hydraulic systems seem to be working fine. When I...

ISSUE RESOLVED. The problem ended up being that my batteries were low. When this problem first occurred my lights were working, and the hydraulics for my slide-outs also worked - so I was not suspecting the batteries initially. But the next day they were totally dead. They were still under...

Thanks for the suggestions. Would I be able to find a replacement switch at any hardware store, or would this be a specialty item that I would have to order? Sent from my iPad using Tapatalk HD

I'm trying to hitch my Cyclone 3110 and my hydraulic front jacks stopped working. The slide outs are working fine. When I push the button to extend I'm hearing a click. Help! Sent from my iPad using Tapatalk HD

I couldn't find an 80 amp, so I replaced it with the 50. The slide outs worked perfectly - no stalling. Regardless of amperage size, at least I know the problem. Thanks everyone for your expertise! Sent from my iPad using Tapatalk

I followed the wires. If these things are cheap, I'll buy both. If I run into problems with the 50, then I'll try the 80. Thanks everyone! Sent from my iPad using Tapatalk HD

I'm having the same problem. Is this the breaker? Sent from my iPad using Tapatalk HD

Thanks everyone. I'll try to drill them out, then replace all of them with slightly larger and longer galvanized screw. Hopefully this will take care of the issue. Sent from my iPad using Tapatalk HD

Does anyone have any ideas on how to remove these screws? The heads broke off and the studs are still in the wall. FYI, these are my ladder screws. Re: 2013 Cyclone 3110. Sent from my iPad using Tapatalk HD

The same thing happened happened to us traveling from Phoenix to Newport Beach last Wednesday. We lost the left rear tire traveling on the I10 going no faster than 60 mph. My Cyclone is less than a year old. It did some damage to panel and fender. Fortunately we were able to get the tire fixed...

I understand that you did not ask this question, but I thought I would suggest something helpful regarding the screen: I have the 3010 so I hope what I'm suggesting applies. Our garage screen has a strap that we pull the screen down with. In our model there is the garage tool box within close...

The premise is that you would hope most people would do their homework before purchasing a tow vehicle (as you are). So if you believe the premise (as I do) and consider that a highway would be a random sample of tow vehicles then actually this method would carry some empirical credibility...

Agree. I have a 2012 3110 Cyclone and pull it with a 2012 Ram 3500. The difference between the 3/4 ton and the full ton is basically springs in the back. Remember that torque is not the only issue: think about the braking capacity. I'm not sure about the Chevy, but the Ram has multiple slowing...

Thanks everyone for the suggestions! I reconnected the wires using Solder and shrink tubing. I also moved the wires out of the way of the trailer springs. When I went to remove the tubing around the wires to reconnect them there was rust on both ends. From that it appears that they were...

I am going to solder then use shrink tubing. Another question: Is there a way to test my brakes to see if they are working while my RV is parked? Sent from my iPad using Tapatalk HD

For me to get this looked at would require me to hitch up and take it to the dealer. Couldn't I just reattach the wires, then wrap them in electricians tape? Sent from my iPad using Tapatalk HD

I was doing some work on my Cyclone today and if got underneath it. I noticed these wires that appeared severed. I'm not sure how. Should these wires be connected? Sent from my iPad using Tapatalk HD

I wonder if backing up sometimes can be over-thought? When backing into tight or difficult places I get flustered when I'm getting all sorts of hand signals. I don't feel like I need anyone to help me manage my steering wheel. The last time I backed into a spot I asked my wife to stand on the...

Lol! Sent from my iPhone using Tapatalk 2

Cookie, I'm with you. Now I'm trying to get a clear definition of "right". Once that is determined I believe they can be persuaded to cover the cost. Sent from my iPhone using Tapatalk 2

High is $900, higher is $1,200. Outcome desired would be structurally sound, and no cosmetic problems down the road like peeling or chipping. Sent from my iPhone using Tapatalk 2

Hello, When we purchased our Cyclone from the dealer they mounted a TV bracket in the loft area and drilled the holes through to the outside (see attached). Our hope is that these holes will be repaired properly so that they will not pose problems down the road. We got a quote which the...

Thanks for the feedback. The dirt/grit doesn't seem to be interfering with the rollers and I cleaned it out pretty good. I'm hoping a once-over with the rust will be enough.

Hello Everyone, We graduated from tent camping to a Toy Hauler 5th wheel with nothing in between. We love the unit, and as I speak we (me, my wife, and three kids) are escaping the Phoenix heat up in Williams, AZ for the 4th of July weekend. I would definitely consider myself a novice RV...

Hello Everyone, We just purchased a Cyclone and are interested in learning about any Arizona/Las Vegas rallies. It's our first RV and we're excited to get going! Sent from my iPad using Tapatalk HD