Recent content by newman

So now there won't be a toyhauler under 36' long in any of the three lineups? (Cyclone,RW,torque)

Well I'm going to assume its being dropped from the lineup, the Heartland website shows the 2812 as "Dealer stock only"....the informal send off usually. I only hope they're coming out with something similar, the 2812 needed updates and design changes IMHO.

Went by a couple dealers today, one with a 2812. They all said the 2812 was not in the next brochure and looks to be going away. Any truth to this? Is there any plans for a new model similar to the 2812? I'm interested in a smaller hauler than most of the ones available but like the quality...

Les Schwab in Missoula was able to fix the problem....they did a thrust alignment on both axles and squared them to the kingpin. The front axle was toed in over 1/2". For $100 they got us back on the road, plus I upgraded to E rated tires, Towmax brand, they said alot of people are changing out...

I'm taking it to Les Schwabs in the morning, hopefully it will solve the problem,or at least make it a bit better...probably end up with a couple new tires now too.

It could be camber, It only shows on the front passenger side, and I know we are not overloaded, checked at the scales on the way across Nevada. Would a Les Schwab tire center be able to adjust the camber or is it a specialty type thing that I would be lucky to find here in Montana? We have the...

My front passenger side tire is worn down to the threads on the outside 1", the rest of the tire looks new. I think I have a toe in problem, thats were the 1/8" difference is, between the front of the wheel/brake backing plate at the 9 o'clock position, and the 3 o'clock position. Hopefully I...

I'm having the same problem on the same tire....but we are on our long trip. How hard is it to align the axle? I measured across both axles and found the front of the possible bent axle is toed in about 1/8" .

Our leak was in the shower valve which caused excess pressure and leaking at a fitting. I took all kinds of things apart to find it, but it took the techs at the dealer to find it and fix it. Its all good now!

OK I hooked up the truck and manully pulled the brake lever, and there was no noise on the front axle. After crawling under the trailer I found a wire most of the way cut were I could not see it on the intital look. After splicing the wire, both sides on the front axle work fine. By the way, the...

After coming to a stop at the end of a hill today, I went around and put my hand on each brake drum to see if they were working. The front axle brakes on both sides were not even warm. the back axle was hot, and the brake controller is a Prodigy adjusted correctly. I adjusted the brakes a few...

Yep, been using a pressure regulator since day one.

Thanks for tthe tip, Jim and Heartland were great to talk to, Heartland is going to cover the work outside of my warranty. Thanks Heartland!

Well, wouldn't you know it, our warranty just ended and I found a leak coming from somewhere under the shower! It seems to be leaking only when there is pressure against the plumbing (hooked to city water or the pump on) It does not look likr there is an easy way to get to the underside of the...

Mine acted very much the same when it was new. The problem was a combination of the fuse being loose and a couple of the wires were not very secure on the back of the panel. After I tightened those up, everything worked fine. Hope this helps.