Recent content by ourtinhouse

We are in the BH 9 to 10 months a year and stay 4 to 5 weeks for each job so I guess we are full timers. Thanks for the wisdom; I will keep shimming till we get a few weeks at home to go over it real good. Thanks Rex

We have aways carried some material to help level up; used to be 2 bys and 2 was to high and 1 wasent enough so we use 1/2" plywood cut into 12 inch squares works pretty good. I am thinking that before my next job, just change out with an up grade in the leaf springs. I think the OEMs are 3000#...

We have an 09 3670RL BH; recently repalce the leafs on the passanger side after the rear axel slid back on that side traveling through Thornton, Co . Broke that spring and other damage to running gear, shocks and stuff. Any way now we have to add 1 1/2" shim to level up on the side with 3...

Why do we always have to add at least a 1/2" shim on the same side every time we park, even on concret pads?

Re: Door repacement Thanks to all; looks like it is Tweetis for the a door and no special tools.

Who manufactured the entrance doors for the 09 BH 3670RL. Has any one replaced one; no special tool required I hope. It is those peskie right hand turns.

Well the welding was compleated to day. Joe Shunimen called this morning for me to have look at it, as I had requested that I would like to see it after disassembly. The call was after welding was compleated though; their dime and no slow down for them due to inspection. Asked if any NDE was...

Sorry for the delay in updating; we have removed every thing from the bedroom area and lower storage areas and are now in Hinton, Mo. pulling up to heartlands shop in Elkheart, In. Need to get it in the shop before my next job starts first of June in Port Arthur. These Pics were taken by the...

Update, Heartland response to dealer was if customer wants HL to cover he has to bring it to Elkheart and pick up when repairs are complete. Usually takes 10 days and no expenses are covered. Dealer is puting it back ot gather for the trip. Stormy weather here in Texas prevented a good visual...

We have a 2009 3670RL that has three (3) areas in the frame broken under the bed room. Dealer contacted heartland there resopnse was not under warrenty no help. Anyone else have this issue. Going over tomorrow and look at it myself really need to know if anyone else had had the frame material...

Who is the manufacture for the tall narrow back side windows on an 09 BH 3670RL. We have one that I can only raise a half inch unless I move the chair and get my legs under me; only get about 2 inches then. wondering if there is some adjustment I can do. all the others raise very easily above...

Thanks for the replies; I had purchased a product call reflectix at the local box store to use to black out the bed room windows as I am working nights on this job. Noted that the radiant heat was reduced in these windows and heard some stuff on the radio about radiant barriers. Thought I would...

MR Moderator help this may not be in the correct place. Has anyone tried or considered the application of a radiant barrier in their RV, and if so where would we install it. If this stuff is as good as I have heard on the radio may be Heartland should consider its use in their RVs. We are headed...

We have an 09 3670RL and it is sagging also, thing is that I carried it back to dealer while it was still covered, and all they did was put another door latch up on that side; pushed the area that had opened up on the side back up and caulked it again. It lasted from Houston to Tulsa. It is now...

Re: Thermo Cube Well wish I had read the whole post befor cominting on my freez up; really wished I had read this before wel left out in January. Hope to be back in Texas soon with enougt time to work on this and some other thins as well. Rex