Recent content by willett

Hi all. My wife changed the degrees to cellcius on the ac control downstairs. The one upstairs is still on degrees. How do i change it back? We have a 2015 bighorn BH 3570RS. Thanks in advance for any help with this.

I found our 4 inch pvc pipe that goes to our septic tank, about 2 foot deep 10 foot from house. drilled a 4 1/2 inch hole in the top of it then took a pvc tee 6 inch x 6 inch by 4 inch and cut the bottom of the 6 inch part off. laid it over my hole with 4 inch pvc sticking straight up. gently...

Re: ATF: Prowler - Placement of awning . . . design flaw? we had the same problem with our door on our previous trailer. took the gas strut off and put a door holder like in cookies post worked good put it was nice having the door half open, reach out and close it with out going done the steps...

given the location of it why would you even need to lock it?;)l

thanks guys i'll try that when I get home tonight

hello. last week I hooked up our 2015 bighorn so the DW could campout in our driveway with her nieces. tomorrow is supposed to go below freezing. I unhooked the water and thought I would run the furnace at 40 so I wouldn't have to rewinterize. I turned on the furnace at the back thermostat and...

I jut saw the icon to attach image. haven't taken pic yet. went ahead and winterized. think i'll hold off on the slide till spring. try to change out the tomax this winter before we take it out next year. thank you for taking time to reply to my post. couple of months working over time to...

I think so. with slide out, loosened two nuts and the loosened adjustment nut, adjusted bolt, could see it moving [rust mark] but didn't move off wall. no sign it moved inside. readjusted to original rust mark and retighten. the way its set up to adjust is nice and easy. maybe not having it...

not savy enough to do pictures.

haven't measured it but when out the trim inside is half inch off wall at bottom and touching at top. other side gap is off to but not touching wall. gap being off a little doesn't worry me but pressure on wall might cause a problem with structure. the place it occurs is next to the door maybe...

hi all. About a month ago I posted a question and got answers on how to adjust our slide. It contacts the wall on one top corner and has dug into the contact paper finish. Hasn't dug thru the luan top layer . I tried to adjust the slide up, 1/16 th at a time checking to see if it came off the...

thanks Mr. Mayer I think I will try it with the info in your link next time I have the slide out. wish we had a forum like this on our first two rigs it would made ownership much less stressfull

hello. I was wondering if anyone knew if I could adjust my slide. we have a 2015 3570rs bighorn and the curb side slide {biggest of three} is good when in but is touching wall inside at top and 3/4 inch out from wall at the bottom. made a small tear in the wall paper at the top wear the...

we just got a 2015 bighorn 3570RS and love it. couple of small water leaks I fixed in our driveway first week after pick up. don't like the towmax tires after reading some of the problems here. thinking of replacing with goodyear g614 before we take it out. the dealer really armour alled...