Search results

Rick: Not going to rule out the freeze up. But nothing changed in the coach. Hate to admit it. but was working fine, I took a nap and woke up about an hour or so ( not sure ha ha ) later. Temp was 5 degrees warmer and no air flow. No one was there but me and the dog at the time. So Sealed unit...

Jim..... The more I have thought about this, I thought maybe I could be prepared with the correct capacitors for the unit when I "Head up the hill" . Not being there I am not sure what capacitors the unit has. With the model number I showed at the top, did you think it was 1 or 2 capacitors for...

Everyone..... Thanks for the information. I now feel better equipped to check out the unit when I get back to it in a couple of weeks. Really appreciate the comments and will let you know as I check it out!

Jim: Yes I agree when the air flow stopped it was the compressor running. THe reason I don't think it is the evap freezing up is that if I turn the unit off for about 3 or 4 minutes, and then restart air flow is back. I will not be back at the park where the unit is for 2 weeks :( , so I was...

Yes I did check all of these and all are clear and the filter is clean

I have a Duo Therm 15,000 BTU Model 59516.531 on our 2006 Bighorn. I have the A/C set at 70 so it has a chance to keep up as the outside temperature gets close to 100 here in Arizona. What I noticed yesterday about mid afternoon , temperature was rising rapidly in the unit and soon was at 80...

I realize this post is a little old, however I have some sagging on my 2007 Bighorn that I can assume the same has happened on and it is in the same area. Just curious on how you ended up fixing the sagging? Did you use the trempro mentioned above and press the skin back into place? Any...

Good Information above, Thanks. Regarding the wheels, yes they are the 06 Series, and I will take a closer look this weekend but I like the idea of getting the G rated Goodyears and going with the correct air pressure. Thanks for the foresight on the 13/16 lug nut socket, I will look to see if...

Well I spent most of the weekend under the RV cleaning up the rust and I am about 3/4 of the way done. I looked again at the axles and maybe I was on my head before but the axles are higher in the middle so guess that is ok. Looks like one of the springs were replaced and has 6 pieces to it, the...

First off, thanks for the responses! This is a great Forum! In response: I am going to get under the trailer this weekend and take pictures to help with the sag issue, at least what I think I see. Seems to me it sags in the middle of the axle, but I will look again. Regarding the tires. They...

Spent some time under our New ( Used) to us 2007 Bighorn. I am a little concerned over all the axle issues I have read. While looking under the unit I noticed one of the U Bolts on the rear axle was not showing the nuts tightened ( all the other U Bolts were tightened where I could see the...

Just a final follow up on the motor... I took it apart and it was all corroded inside. For a motor that is 3 years old I was shocked at all the corrosion and rust inside the motor casing. (One of the brushes corroded stuck open) I cleaned it all up, lubed it, reassembled it and used 100%...

John: Will be taking the motor apart soon. Regarding the switch, sorry for the confusion. The switch inside does work the outlet by the awning. THe swich ion the battery compartment was actuallly to extend the slides if wanting to use that switch. Seems that we really did not have the unit...

Just a short note to say Thanks for all the help! I'll check out the outlet by the awning and bet you are correct. Never thought that the switch would work that outlet! Also will try a search on "landing gear" thanks for the advice! Been out working on removing rust from the undercarriage...

Well, Nevermind ( As Gilda Radner used to say ). I found the circuit breaker, reset and all is good. Not sure if the rocker switch inside should allow retraction of the slide also, but not a big deal today. Anyone know what the electric switch , inside the 2 door cabinet, on the far right side...

Thanks for the info. I thought later that the purpose of those know\bs was for that. However, now the slide won't go in or out. No power any idea where the fuse is? I checked the fuse inside but there must be a reset somewhere else? If this needs to be posted some other forum, please let me...

Thanks for the quick reply Jim. You are correct it must be the mains are electric, and it does have the bar controlling both at the same time. When the other switch ( the 1 I mentioned in the first post) is pressed inside the battery compartment, the bar does not rotate but the unit appears to...

My first post on our new (used) 2007 2925 Bighorn . Is it possible there are 2 different controllers on this unit? There is the standard switch in the front which is retract and extend and appears these are hydraulic. Worked fine yesterday and both legs go up and down at the same level. There is...