Search results

Thought it would be easier to start a different thread since my first one never really answered my question. When it rains, I have a leak which comes out of the porch light above the door (dry above the door) and on the top of the door frame inside the trailer. Pulled the inside trim above the...

It's been in before for leaks covered under warranty. I have an extended warranty plus I can show him this video that clearly shows the butyl tape was not placed against the flange on the outside of the door at the top. The plan on climbing up there today after work or tomorrow. I was just...

I have a 202 4007 and I have a weird leak when it rains. I'm wondering if anyone else had this leak and where I should start looking on the roof or maybe along the awning where it mounts. When it rains, and with the awning out even, water comes out of the bottom of the porch light which is...

Thanks. I have 7 lights that flicker or are out. Seems like Heartland should step up here. I bought 10 off of Amazon. I will drive home this weekend and pick them up.

I haven't posted in a while. I have a 20/20 Cyclone 4007. Shortly after I bought the trailer, one of the LED ceiling lights started to flicker in the bedroom. I pulled it down to check to see if there was any visible reason it was doing it. It looks like maybe the PC board or a bad solder joint...

Hi all. Been a while since I was here. Not sure if my signature is current (or if it still shows up) but I have a 2020 4007 and my insurance through Farmers is of the hook. Unfortunately am single now and Veronika did all the bill paying. I just worked and gave her the checks so I never knew how...

So your vent is just straight through the wall? Just making sure they don't prep with ducting in the wall. Thanks.

Have a 2020 4007. Using it more for out of town work than recreation. Want to install a washer/dryer. Questions. 1. What brands do you recommend? Combo washer/dryer or separate stackable? 2. Did you install a pan and if so where does it drain? 3. I see a sticker on the wall for a dryer vent...

We love it. I ended up staying in it over the winter when I was working out of town (Napa/Sonoma wine country). Was only a 3 hour drive so my wife came up every chance she could. Compared to the 3611 it is wonderful. The mattress collapsed after a week so we bought a sleep number. Can't wait to...

Hi fellow Cycloners. (Is that a word? Stategery?) Been a while since I last posted and browsed so I thought I would check in and show off my new dually conversion/toter bed. It turned out much better than I expected. A little recap, we traded in our 3611 at the end of last year for the 4007...

Thanks Sent from my SM-G960U using Tapatalk

Hoping someone can give me the measurements on the king mattress in the 4007. I'm sure it's the same as the other models. The trailer is 3 hours away and I forgot to measure. Want to take a new matress back up with me. I believe it is RV king but really want numbers to be sure. Sent from my...

Fun memories. Your Aunt Veronika says hi. Sent from my SM-G960U using Tapatalk

We have a new Cyclone (3rd one) and the king bed in it is a joke!! I'm working out of town and have stayed in it during the week for the last 3 weeks and my side has no support left. Actually feel the plywood. I guess they expect us to replace the mattress right away. i guess I could warranty it...

Anyone else have the same family as us? In the 2 years we had our 3611 we never changed the pictures and our new Cyclone has the same pictures. We are gonna name them and come up with stories for the pictures.....

We recently traded in our 3611 for a 4007. The 3611 was an insurance replacement for our burned 300C (which had a great layout for us). When we got the 3611 we were so disappointed in the layout and design. It appears it was designed by someone who has no real experience in an RV. Not practical...

So apparently Mike ran my plumbing and Steve was working when they ran your plumbing. (Maybe Jim and Linda....) Anyway mine is completely different. I am in a park with a portable pumper that comes twice a week. Grey 1 said it was full and the kitchen sink stopped draining. When the pumper came...

Ahhhhhh.... Makes sense. I told my wife that since it was already plumbed I was gonna put a urinal. She didnt like that idea. Sent from my SM-G960U using Tapatalk

Our new rig (4007) has 2 waste drains and 5 push/pull valves. Our 3611 had 2 drains but 1 valve in the back and 2 in the front. Only thing we needed to figure out was which of the fronts was black and which was grey. The 4007 has 2 in the rear so I am assuming 2 separate tanks (black and grey)...

We are on our 3rd Cyclone, a 2013 300C, 2017 3611 JS, and now a 2020 4007. The 2013 was solid and we had no problems. Quality and craftsmanship was great. Unfortunately a garbage dumpster behind it caught fire and the rear of the rig burned. Was deemed a total loss because of smoke damage. Had...

Re: New 2020 4007. Update/Listing Portside (fixed) Thanks. So far we love the layout,especially the bedroom, and the quality of the work on this rig is night and day difference from our 3611. 3611 was shabbily thrown together. Pieces of trim and a cupboard door literally fell off on our first...

Re: New 2020 4007. Update/Listing Portside FIXED!! Turns out the touchscreen was not seated fully. Today was the first day I was here during daylight and it wasn't pouring rain. I found the install instructions and then checked connections. Turns out the touchscreen wasn't seated properly...

I finally got the new 4007 out for a shakedown to find any issues and fix them and to make a list of those things that the dealer will fix. So far so good. I am driving a truck working the fire cleanup in Sonoma and Napa counties in Northern California. I live about 2 1/2 hours away so this is a...

We are on our first trip with our new 4007 in Northern Ca. Had some pretty good rain and so far no detectable leaks. Looks like that is the corner of the bedroom slideout. Could be leaking anywhere along the top. Tough place to find the source.

I will take one. Sent from my SM-G960U using Tapatalk

Hopefully last post from me for this thread. Behind this panel is the cutoff switch that prevents the main hydraulic slide from moving unless the inner electric slide is closed. One of the wires came out of the crimp connection. Also it is a very lousy design. If I was keeping this I would...

Spoke too soon. Crimps were an issue but apparently not "the" issue. I forgot to close the hydraulic valve you open when manually opening and closing with a drill. So it works fine with the calve open. Told me that the valve was not opening. Pulled the valve and confirmed it works (12 volts to...

I can't believe how stupid I can be. I have literally diagnosed issues such as this and trained others when I worked on hydraulic systems and electrical systems on tractors and ag equipment. 2 major rules. Always check the simple things and never trust someone else's work if you don't know them...

Progress. Slide is in. As I noted before the Lippert manual does not tell you to open the valve when manually opening or closing with a drill as it does with the leveling instructions. Slides open and close fully manually with no problems so it is not hydraulics or binding. Now I need to trace...

Awesome idea!! Sent from my SM-G960U using Tapatalk

Inner slide is electric, outer hydraulic. Sent from my SM-G960U using Tapatalk

Another thought. This slide has a slide in a slide. If the inner slide holding the couch is not in, the outer slide wont move. Anyone know where the sensor is? Sent from my SM-G960U using Tapatalk

As soon as it gets light here, I'm gonna dig into mine but the pump locks up on mine like its stuck. Sent from my SM-G960U using Tapatalk

Did the ram move though? Sent from my SM-G960U using Tapatalk

I'm 6'3", 240lbs and I tried that a couple times. Shoulder is sore and slide is still stuck. That's why I'm gonna get in there and go eyes on to see why it won't move before I try some more muscle.. Sent from my SM-G960U using Tapatalk

Ok we are getting somewhere. I think the slide is definitely stuck. Gonna pull the bottom corner off tomorrow and see what I can see. Sent from my SM-G960U using Tapatalk

Another question. The kitchen opens first and closes first. Is the a pressure switch that diverts the pressure to the living room slide or is the order based on least resistance? Sent from my SM-G960U using Tapatalk

It does and I was thinking the same thing. It really is acting like the slide is hung up. Had my wife helping today but it was pouring rain and cold. Wanted to get her back in the house. Gonna recruit some muscle tomorrow to help me. Appreciate the response. Sent from my SM-G960U using Tapatalk

Works normally. Sent from my SM-G960U using Tapatalk

Hydraulic Slide stuck halfway on day it was going to be traded in. HELP!! Really need help here. Was supposed to trade this in for a 2020 4007 this morning. Had to reschedule to 1 tomorrow hoping I figure this out and it is something simple. 2017 Cyclone 3611. Kitchen and living room slides...