Search results

We had to adjust the plate on the frame slightly with a file so the dead bolt motor had enough power to slide the dead bolt back and forth freely. Doesn't do well if binding at all.

Re: Potential Entertainment - The Cavern Beat Jim Can you clarify for us that have not attended before. Will the registration opening be posted here or via direct email? Thanks

Re: Shorter 365? Agreed, we are looking forward to seeing the shorter floorplan over the next few months!!!

I would have to agree with BG24. When everything is normal driving you might make do with the SRW, but really, is it worth someones life or major injury to push the max. We know from experience that the safety margin in the DRW is well worth the few extra dollars and the inconvenience of the...

My 2007 did this, changed the oil and both transmission filters, problem solved. My business partner had same issue in his 2008, dealers could not find the problem, a month later, blew trany just out San Fan, CA. $18k replacement

Re: Landmark 365 - Placement of Water Heater and Furnace Corrected website www.PrecisionCircuitsInc.com

We have polished a couple units. We bought a top of the line polisher that was easy om the arms and found some great wax, polish and advice through these guys http://www.cyclotoolmakers.com/mobile/

Is there any projected schedule for the production of the Key West?

We also have the Monterey, here is a few of the problem list we have encountered. floor above the power reel is breaking up. walls between the slides and rear walls are pulling away shelves in the upper cabinet on the rear wall has broken apart continual problems with the fire place and sound...

It's always interesting seeing other owners review. We have owned 4 Forest River and now the Landmark. My Cedar Creek was twice the unit all around.

If you are not under warranty, here is were to order Parkin Accessories at 1-800-637-8938. mine are under warranty and when they are installed i will let you know if they are any different from what we have

I talked with Lippert warranty about the problem, they say the material on the roller is probably the problem on mine and they will ship the replacement crank to me directly or my dealer under warranty. I will be ordering mine directly as it is easy to replace. If not warranty, you can buy...

What i have found out so far is that these defective window systems are made by a division of Lippert, big surprise! I have sent an email and waiting for a response. I will call them after a week. Our production was Feb 2014 so I don't think it is just a bad batch since others are a few years...

We currently have both in the ref., never used them, disconnected the line. They came from the factory with water in them and all froze up. We installed a water dispenser tap at the sinks which is fed from bottled water in the belly on its own pump. Easy to winterize, always good tasting water.

We like the concept, no sure I would want it on a Lippert frame though, I see lots of potential structural issues.

What was your production date, wondering if this is just a small batch of windows. I am talking with HL in the am about this

The frameless window crank pops out of the track allowing the window to open freely. The plastic rollers do not stay in the track. This is bad enough when parked but we will lose the window if it happens in travel. The only way to repair was to drill out the rivets, re-install and put rivets...

I'm not sure Jim, the dealer installed it last month, they had to order it so i would hope that it was new technology. That might explain why they had to pull new cables. I will be asking the questions with this info. Thanks for the heads up. Life is always a huge learning curve, especially...

We had the Trav'ler installed at the dealer for $500.00. We were also told the unit was prewired. The unit mounting and power were the only thing run. The dealer pulled the wires down the vent into the belly then to the tv locations. The trav'ler requires 2 wires per TV location not one as...

We have the coffered ceiling with no problems. It appears to be glued as with have no staple marks

Good info, i will try and find some indication of who the manufacter is and make those inquiries as well.

Hi Brian i sometimes think the dealer or his staff are not totally with it. In looking at the Yeti system switches and as Dan mentioned, how can they be wired wrong, something just isn't right. Our problem occurred while travelling so it is the 12v side unless the tank heaters are connected...

Agreed, i usually give the dealer the benefit of the doubt for the first try, then move up the ladder. i am heading home tomorrow with a full water tank to see if it leaks out again. Going to do some more testing to hit HL with all the issues at once. I believe I read here at one time that...

DanBoth switches have lights in them, both were off yet power to the Yeti, i will discuss directly with HL. This all happened when while travelling down the hwy, the 1/2 full fresh water tank drained up into the belly, dealer couldn't see why this happened, when we stopped we could see the...

Unfortunately the insulation, heat trace and line have to be replaced. Dealer says HL won't cover it. I haven't checked the tanks yet, hope they didn't melt as well as they were empty as well. I'm not finished with this yet, i just need to prove it was the unit and not me.

We forget to post the finally, Yeti package has full time power and the insulation was burning from the power running all the time. It appears the switch was wired backwards. Finally blew the fuse. The insulation, wiring will have to be replaced.

No experience with that other than some research as the idea is good. Dealer says it will void roof warranty so i would suggest getting authorization in writing first. We have not yet taken that step. I will be watching this thread carefully as to the responses.

We would like to see the island sink moved towards the front end of the island, not centered and a countertop extension added to the back side, not a flip up but a pull out right under the main counter on really good slide and rolls.

Final update Shore power was browning out on one line only, camp ground fixed the problem and all is done Time to relax and have fun Dan, thanks for all your help

Just heading in behind the storage, the built in surge protector and what appears to be an inverter but not back that far yet

I am following from the battery to the Kisae power inverter, then to the Kisae transfer switch 15 input battery is now down to 11.5 v, dropping fast, its almost 100 here today. currently the remote light is lit in the cabinet, still not power in main area. so if I plug the transfer switch...

Battery. 12.3 h - n. 118.2 h - g. 117.8 n - g. 1.3 inverter input. 12.3 output 0v, reset. 118, run 30 sec, kicked out kitchen n-g 1.3 nothing else all mini breakers ok would it hurt anything to plug the transfer switch into shore power?

New development we have now lost power in all plugs, lights are dim, turn on yeti package, kills all light. i suspect the power issue is causing the AC issue. since the genset doesn't solve the problem it must be something internal like the inverter maybe.

I broke down and went up VERY carefully, pulled it apart, no fuses up there. Back to the drawing board

Hi Dan i had reset the breaker, found the 12v fuse blown, had changed that, unfortunately we only have vents and no access to the unit. I followed the stat wires but lost then behind the millwork. I might attempt to get on the roof to see if i can get the cover off the unit but my ladder is...

We are getting error codes E7, E1 on the stat, worked yesterday. we are in a new site today, front unit working, not main. checked breakers, test with genset, still nothing Suggestions.

Thanks all for your comments, Randy, not a matter of sense over money, extra safety over basic requirement. As a former professional driver I am partial to the tractor unit as my 3500 is maxed out and i would really like to take the Wing for touring around. i would be interested in hearing...

Dan, we also have the same truck, installed BD3 hitch and air bags on the truck & Landmark axles, Lippert Center Point, get ride

My BH would love it if we shut down at 300m, when i'm packed up I just like to get there, 12 hr days aren't unusual but i'm sure that will change one day. We are hearing a range from 8 - 14 MPG. We would like to mount the bike behind the cab for local traveling. Bob, sounds like an...

We are entertaining the idea of using a Freightliner as a tow vehicle, but are recieving many conflicting pieces of info. We hace concidered thee drawbacks of travelling around without the trl. what we can't get is a straight answer is on fuel consumpation. We know that varies with speed...