Search results

well no literal hole in the floor but it did puncture the black plastic bottom. Starting to dent into the wood. Yes its where the slide out is sitting on the roller when its closed for transport.

Has anyone had this issue with a slideout? This is on the bottom of my bedroom slide. It's starting to make a hole in the bottom where the slide is closed and sitting on the roller. Any thoughts? Sorry for the pic being sideways. Editor always turns my photos on their sides

yea we were in the 4000 block. I had to take up some of those brown site markers in front of my space for my camper to make the turn. Always get the premium spot for the most room. I have to have it due to size and it works for me. Some spots harder to get into than others.

After reading these comments I did a google search last night on toy haulers using the heater strip in the garage. A lot of people didn't like them from what I read. They said anything below 45 and they are junk. I have no idea. I will try it of course but after reading all the negative feedback...

We had such an awesome time there. Ready to go back soon.

I agree...from here it looks like the fresh water tank. Some sort of rupture.

Is it a BIG difference? Can you tell us how its better?

Ok thanks for the replies. I plan to put a little eden pure heater in the garage for those cold nights if the kids are sleeping in the back. We convert the garage to a baby room after we roll the golf cart out when we get to the camp ground so it has to be warm when its cold outside.

you are correct. I about fell out in the floor when I was told that. When I take it back for them to try it again, I am going to really give the service guy a good talking to about it. I already took him outside nd showed him how bad it looked. Its at home now in its new shed. They were going to...

Hey guys, I was wondering how the furnace operates? I turn it on and it does heat up the camper except for the garage. Heat barely flows through the vents in the back. The thermostat in the garage set to furnace does nothing and the thermostat in the den does nothing even though it's set to...

So all you do is unbolt the old pin box and bolt this one in?

They told me the body shop went to Oreilly to match the paint. When the service department told me that, I about fell out int he floor. I knew it wouldn't work. I told the Camper Dealer to contact Heartland and get the paint code to that front end when it comes back to get redone.

Whats the part number? I need to order one. Also where did you get it from?

Did you ever install the mor ryde? I guess thats the route I'm going to go.

Well Heartland gladly approved the repair. Problem is the body shop has done an AWFUL job. Trash in the clear coat and the paint color doesn't match at all. Also they did some damage to is as they were fixing it. Looks like an air hose rubbed the paint off in another section. I have the camper...

Here is the Golfer that I am looking at. It looked kinda low to me to get in that toy hauler without bottoming out in the rear - - - Updated - - - it won't let me straighten up the pic but here is a pic of the rear of it.

Does anyone here haul a golf car in their garage? If so, will a standard golf car make it in the garage of the road warrior without dragging as you load or does a golf car need to have a lift kit so it can make it up the ramp?

Im 100 percent positive there are only 2 Gray tanks.

Hey guys, After my first trip, I have a couple of questions. Sorry if they are dumb but I am used to a camper with one drop. Of course the road warrior has a sewage drop in the front and rear. At the camp site I opened the gray water in the front and only used one hose since nobody was using...

Pretty sure that switch is the water pump switch in the pic. My new 413 has one

Ok sounds good to me. I am standing by waiting to see what you turn up. I am going to order one as well. I guess I will install it myself too. Doesn't seem too terribly hard to install.

I will add that I did see this unit a few days after it arrived at the dealership. It only sat on the lot 20 days until I bought it. It was sitting in the same spot from day one of its arrival. I don't think it was don't at the dealer. I think this is something from the manufacturer.

Im 99 percent positive its not glue residue. Its a big lifted up edge thats hard as a rock and goes with the rest of the paint beyond. Im wondering if the dealer added something but I doubt it. At this point I am going on our first camping trip this week then another beach run in a few weeks. At...

Did you ever hear anything? I emailed them and haven't heard back yet. Trying to figure out the right part number.

I'm 99 percent it's clear coat that was missing underneath the old decal. It's raised for one and for two you guys can see that the colors don't match. You can see the clear coat start at the old decal edge and go beyond the edge. I have a couple of camping trips coming up then I'll take it back...

What would you guys do? The 88degree turning radius decal came off yesterday and apparently they clear coated around the decal oddly enough. Would you guys have them put a new decal in that spot? The clear coat has a raised edge all around the border of where the decal was.

ok got it fixed....It squats my dually about half way. May need bags at some point.

yea but now that the glide is gone, will that new flex air take the shudder out of the truck like the glide did?

Heck just call them. I could not imagine them not making it for our campers

if you call tomorrow , please post here what they say. I'll hold and see what they say

check me and make sure I'm right but that's what I'm seeing. If that's the deal then I may go ahead and order one tomorrow

I just checked their site and they do make a tri glide for up to 21,000 pounds 229669 is the part number for that pin box on their site

got it. Thank you. What are your thoughts on the moreryde?

great thanks....one last question. What is the difference between the tri glide system and a regular trail air system?

do you have to put air in it every time you hook up? My only concern from what I read so far is that if I get to a camp spot then when it's time to leave not have access to a air compressor. There I am stuck with a deflated trail air hitch

Hey everyone. When I brought my warrior home from the dealership the other day, it sure was bouncy. I was told that toy haulers like the road warrior tow rough when there isn't anything in the garage. Is that true or do I need to add a trail air kingpin? anyone using the trail air system?

Re: Transfer switch on generator I found it!!! After help from Ray here it was one of the breakers off on the generator. One was on and one was off

Re: Transfer switch on generator Yea the first one you have is the one I have

Re: Transfer switch on generator I can turn everything off in the unit but the rear 2 will not turn on. Hold on and I'll try to upload a pic. The system is called power control system by precision circuits Inc - - - Updated - - -