Search results

Well, you may not know this and most RV-ers do not: Technically, I was told my a Journeyman Electrician, who owns an RV, that one can SAFELY only use 24 Amps in a 30amp service environment and 40 amps in a 50 amp environment. The figure is 80%! In my other RV, a 50-amp capable Holiday...

We JUST got our power upgraded to 50-amp service from 30-amp service. HOW MANY AMPS can be allowed into each leg? I have heard that a maximum of 80% of the rated Amperage can be used total. That means 40 amps for a 50 amp service. Any ideas or suggestions?

My older RV's had RV refers (Absorption Models with Propane for travel) and there was an outside Cover to access the rear of my Refers (to change out Defective Main Boards, etc.) Located clearly was the PLASTIC condensate Tub. It would sometimes be BRIMMING in the winter months or colder...

I finally had a chance to get out and grab a page shot of the Relay that my neighbor thinks that he reset. It is here. He claims that a RESET BUTTON POPPED OUT on the side.

Thanks, I did feel around and I have not tested our SLIDE (I am afraid to do it, as you can imagine...it has stopped three times on us). I will take a hard look. It is raining and windy right now. I will get back here when I poke around when this storm breaks. I grabbed a page shot of that...

REF: SLIDE OUT FAILURES in extending and retracting. A few months ago, my ENTRY SIDE slideout, containing the Dinette and two Easy Chairs, failed to EXTEND upon our return to our Full time Park. We leave it sit, plugged in here, YEAR ROUND. My issue is that the BIG DINING ROOM/CHAIR slide...

Thanks very much. Will review this material and hopefully I will be able to get the problems narrowed. Dave

Yes, on the VERY BOTTOM EDGE of BOTH BEDROOM SLIDES. One smaller bed-slide is inside our LARGER slide out, like a box in a box) and BOTH have those GEAR-LIKE TEETH. The other two MUCH larger slides do not have those Teeth. Here are pictures of the BEDROOM SLIDES and the other two larger...

OK, everyone. I found a Youtube Video referencing the SCHWINTEK SLIDE-OUT controller RESET PROCEDURE and the tech in this video advises us to reset those controllers after a few trips: I spotted the reset procedure on the Controller itself: "Press this button 6 times and hold down on 7th...

I wonder if the Factory would know? I have had very little luck with them. They ran me around on my Control Module failing (KIBnet) and would not lift a single finger on trying to replace it and it has never worked for long. We have had it repaired twice by the outfit that manufactures them...

Really? Our Rig was never owned by an individual but was a Dealer's Show unit. All of the stickers on the outside, in the shower and so on showed ZERO wear. The Washer & Drier were never used. Not a single pet. So, if that was done, I wonder by whom? HMMM?

Thanks, Lyle. I will check each one of those. Dave

Here are images of my Power Compartment, where the batteries are located. I am trying to locate the (auto) reset interface for My slideouts because my Slide-outs are working only so far and then the stop suddenly, or will not move either way . A neighbor came by and found a reset and I am...

I will copy these instructions and paste then to a DOC file and print it out as my guide, Master! Thanks from my heart's bottom. I have also helped others humbly in my Holiday Rambler Diesel forums. VERY HELPFUL sources and when I could pay it back, then I would! These RV's NOW are way more...

Hi, Dave...this is Dave here, too! Yeah, those may well be new batteries but they are likely CHEAPO from the Dealer. He replaced them for me and they delivered the unit to our CO-OP in Oregon. MAN, I sure appreciate you and LYLE. I cannot believe how useful our FORUM is! Thanks for your...

Lyle, first up: THANK YOU. Yes, the batteries were new last Summer and are ZERO MAINT style (not wet cell, as I am used to having in my Diesel RV which we keep on my parents property (Mom died two days ago, so we left Oregon to come back here). SAD DAYS. I metered them the other day...

I found this forum on "SLIDE-OUT BREAKERS" being tripped. I have had that same issue TWICE NOW, pulling IN the slides and extending them out this spring. A neighbor came by and HE reset what I believe is the BREAKER but I am NOT sure I know which one it was and how to reset it and more...

Here is a picture from a forum that shows what I think might be the SLIDE-OUT BREAKER.

I found this forum on "SLIDE-OUT BREAKERS" being tripped. I have had that same issue TWICE NOW, pulling IN the slides and extending them out this spring. A neighbor came by and HE reset what I believe is the BREAKER but I am NOT sure I know which one it was and how to reset it and more...

I sent mine to KIBnet's owner, AT COMP TWICE and it has failed AGAIN. Now, when I push the pairing button, it blinks and I cannot find the Module in new Bluetooth devices which means that the KIBnet unit is not broadcasting a signal to my Android device. It worked for a week when we returned...

Mine is on its way back from the Tech Support Group at American Technology Components (ATC). I have been in contact with Walt, the Manager of Tech Support and he got a bit snippy with me when I kept pressing them the FIRST TIME I shipped it back which was in Feb 2023. The unit stopped...

This thread could help others. Thanks for sharing your situation.

Yes, great update. My Dad always used to say that people focus TOO much on the hot side and rarely meter the Grounds for continuity.

I wonder if Heartland can do something for us? KIBnet's people are tone deaf and not responsive and want to keep charging me over and over again. Mine is on its way back after paying for what amounts to be an UPDATE. This is ridiculous. Does anyone know if there is a Client Services...

I own a 2020 Landmark Oshkosh with the Same Box as shown. We got back from a trip and it worked fine for two days ON BOTH of our Android Phones and then Suddenly, it was popping up an error message to Pair with the Box. Does anyone know if I need to do something special? I have done the...

I own a 2020 Landmark Oshkosh with the Same Box as shown. We got back from a trip and it worked fine for two days ON BOTH of our Android Phones and then Suddenly, it was popping up an error message to Pair with the Box. Does anyone know if I need to do something special? I have done the...

Yes it seems that this sort of work came into fruition in the 2010's. I have seen worse. We bought a slightly used Landmark 365 and it was better than what you found. BUT, I was in that compartment, with the wall inside the big compartment removed to seek out an apparent leak. THERE IT...

It may well be Firefox...I will try Chrome. Thank, Dave p.s. I was trying to, at firs, download the Lippert Slideout doc. I also do not use Microsoft Word, Excel or any MS software...I am using OPENOFFICE.

I went to the TOOLS section on Slideouts, clicked on TWO of the DOC links and they are failing to upload or download. Does anyone know how to make those TOOLS docs to download. I have downloaded the Main Manual for Heartland before. Suddenly this function here is not working.

Hi, Rocky: my wife and I, just 8 days ago, had ALL of the Slides DONE and retracted except for the LIVING ROOM, ENTRY side slide (with the Dining Table and Two recliners on it....A LOT of WEIGHT! We have a 2020 Landmark 365 Oskkosh Model>>>>>AND THAT LAST SLIDE had water on the SLIDE...

Model: 2020 Landmark 365 Oshkosh, Bought used last Nov 2022. Yesterday, a hot day, we decided to open Awning number one (in front of our door, right side). It would not work. There was NO motor or Awning Unfurling Noises. NOTHING happened. The button/switch inside, next to our Dinette...

Thanks for this tip. I would have posted this earlier but got busy with yard work. I looked under the table and faintly, I can see screws in a LARGE panel (3.5 feet wide and as tall as the space beneath the Table)...so, I will grab my screw gun and get it removed to take a look.

I am wondering if anyone knows how to remove the exterior TV from a 2020 Landmark 365 Oshkosh Model. I tried to turn it, lift it, pull up and push down and it is STUCK.

I need to remove the Outside (door side) TV in order to access the HDMI input as I am installing a Roku unit outside. Can anyone guide me as to how it will come out. I am assuming, but not sure, that the TV will RISE UP (lifted) into Cabinet area and that will allow me to UN-HOOK the...

We own Landmark 2020 Model, 365 Oshkosh. These are nice Rigs and we have been in it for about 8 months, now, off and on (Oregon and Cal, we have sick folks)....anyway, be sure to check for older tires, age and wear and tear. Some models of Heartland products have SOME issues with Panel...

I am still working on this issue. I finally found a Coax Connection on the OTHER side (entry side) inside the big storage Compartment. I balled up a "JUMPER" piece of foil (into a small ball, as I do not have a jumper with alligator clips - in the other RV, of COURSE)....and I am simply...

I have the same question as Dwatsspdx has. And, does it come with a Control Module to keep your batteries from boiling off? THANKS SO MUCH IN ADVANCE. I am running out of time to get this done as we launch in a week and I have to order Panels really soon. Regards, DJ

I have two sets of Batteries: TWO six Volt T105's (House) and two Standard 12-Volt Starting batteries for my Diesel Engine. ANYONE know how many TRICKLE Volts I would need for the 6-Volt Batteries? I would assume that I would add two Panels, one for each bank. The Two Starting Batteries...

I own a 2020 Heartland OSHKOSH Landmark 365. I cannot seem to get it to reset using the Smart Phone. It pops up and keeps telling me that I need the "owner's permission." Does anyone know HOW to bring the KIB Module/System back to FACTORY RESET so we can then use it?f The Manufacturer wants...

Thanks, Cookie, Beth and Thom! I think that you are all great to reply so quickly and I have instantly learned that this forum is great. I called Heartland and Spoke with Diane in TECH support and she is really a good contact (very smart about the Landmark 5th Wheels)...she confirmed that...