GOTTOYS
Well-known member
Found 2 zerk fittings on the side side of each of my Trail-Aire equalizers. Had no idea they were there. I need to get a longer flex hose for my grease gun. My tires are pretty close together and I can't get at them without a flex hose on the gun. Also adjusted my brakes today just the way I was taught at the Lippert seminar. It went pretty well after I figured out what direction to move the adjuster wheel. Haven't done any brake adjusting for about ummmm...30-40 years. Decided not to pay somebody and try it myself. Looks like about a 1/2 hour job once I dug out the old tools and the jack. I also removed my new Tri-Glide and ground the top edge a little bit as suggested by the Lippert Service guys, so I could get it up into the top set of holes. Have to get it hitched in the A.M. Should be pretty close to level now. I figured out a way to remove it and install it by myself using some wood blocking on the back of my truck and raising or lowering the trailer to line up the holes using my front trailer jacks. Piece of cake. Pretty tired tonight...Don