Discussion thread for RV SnapPads

2psnapod2

Texas-South Chapter Leaders-Retired
You can definitely see the rust areas in the one without the hole. Maybe Heartland could add them as an option. Never letting the bottom touch the ground would be great for the rust issue. Also really like the idea of the added height off a 2 inch block added if needed.

Sent from my SM-G900V using Tapatalk
 

Brader

Member
Has anyone shared photos in detail of drilling drain holes in the SnapPads? Will SnapPad be releasing a version of the SnapPad? Is there a website offering Heartland owners a discount or free shipping? I would love to purchase a set.
 

jassson007

Founding Louisiana Chapter Leaders-Retired
I have drilled hole in two of mine that always hold water. I can't remember what size but I used but was not very big. I only did two of them as they are the only two that seem to hold water.


Sent from my iPhone using Tapatalk
 

Nabo

Southeast Region Director-Retired
Jerrod - let us know how hard it is to get the other pads off. The two front metal pads on our coach seems to show more rust around the lips of the metal pads than the other 4 jacks. I agree in that we love how the SnapPads works, adding the little extra height and I think helps stabilizes the coach when all the jacks are down and set up. My concern is tearing or damaging the SnapPads' lip trying to take it off. Yes they need drain holes to help reduce the water retention on top of the metal pads to help minimize rusting issues. If I had really thought about it, I would have spray painted the metal pads before adding the SnapPads on. Aw will
 

Jesstruckn/Jesstalkn

Well-known member
I used a little WD-40, a few screwdrivers and it came right off
328c167fd3777934251306c966bda8c7.jpg
5b453c2367b9998ed4b3c2936b619b05.jpg


Sent from my XT1254 using Tapatalk
 

Jesstruckn/Jesstalkn

Well-known member
First hole is a great success
I used a 1/2" Forstner drill bit. The fast cleaning type. It drilled a perfect hole right through. I started the hole about a 1/2" down the side then drill in an angle back up towards the groove. It came out perfect.
7b3fe15e7aa6e1fbc2e441673dcfd7ac.jpg
0197dec6c59ebe8431a73d6d29f2bfe7.jpg
8167805ad5ffc967a463e015815c7192.jpg
f4f1073375cdcff5e62936dc0f4b1db7.jpg
33d013a3dd85aae8638249a9e9b05037.jpg


Sent from my XT1254 using Tapatalk
 

Jesstruckn/Jesstalkn

Well-known member
Now that I'm looking at the pictures I might need to angle it up a bit more. I'll install this one and see how it looks.

Sent from my XT1254 using Tapatalk
 

cookie

Administrator
Staff member
My RV SnapPads are scheduled to be delivered on Monday.
Rather than drilling a hole I intend to try and melt a hole through with a pencil tip soldering iron.
Don't know how that will work out but I'll let you know. Unless someone else tries it first.

On edit, since I was distracted while posting it took me a half hour to complete and now I see that Jerrod used a Forstner bit and I like that idea better.
Now I gotta look for my Forstner bits.

Peace
Dave
 

boatto5er

Founding VA Chap Ldr (Ret)
I'm waiting on you guys to get this resolved so I can order mine.


Sent from my iPhone using Tapatalk
 

Jesstruckn/Jesstalkn

Well-known member
I did another hole on the opposite side of this pad then after breaking out my rotary tool to clean it up I see this hole is to high, I didn't want to jeopardize the upper lip of the pad. I think it's fine but the next one I will drill the hole 1/2" down like I did the first one, then raise the hole up into the lip with the rotary tool.
I really don't think you guys need to be this particular about it but I'm trying to find the perfect hole.
The pad holds a little bit of water even without the SnapPad on it. But with the holes in them they can drain the majority out and evaporate the rest..
d2002acd98bbf84ab41e5bd066d12a4c.jpg
dcf0bd85d83a9397c7edc43e07c50b66.jpg
ad11829a41af9d219199a29704a070b9.jpg
40279a49cc52e365b2ae0e67302a8213.jpg

4e5a489aa796b227d175bee0557d74de.jpg
325b031a5494941cdba67d4d8e9159d5.jpg


Sent from my XT1254 using Tapatalk
 
Last edited:

Jesstruckn/Jesstalkn

Well-known member
My RV SnapPads are scheduled to be delivered on Monday.
Rather than drilling a hole I intend to try and melt a hole through with a pencil tip soldering iron.
Don't know how that will work out but I'll let you know. Unless someone else tries it first.

On edit, since I was distracted while posting it took me a half hour to complete and now I see that Jerrod used a Forstner bit and I like that idea better.
Now I gotta look for my Forstner bits.

Peace
Dave
I found that whole set at Lowes for $19.99
e28f72c166c83feffda8e3c5812d47ba.jpg


Sent from my XT1254 using Tapatalk
 

Jesstruckn/Jesstalkn

Well-known member
I'm waiting on you guys to get this resolved so I can order mine.


Sent from my iPhone using Tapatalk
Order them drill the holes and slap them on. You will love them
That drill bit went right through no problem and a nice clean hole.

Sent from my XT1254 using Tapatalk
 
Last edited:

Nabo

Southeast Region Director-Retired
Thanks Jerrod. Through your trial & error to find the best location for the drain hole, this gives me something to think about.
 

Jesstruckn/Jesstalkn

Well-known member
I popped this one off drilled the holes took a picture and had it back on in less then 2 minutes.
That is the perfect hole
6873905a454049a1d9d5c01e739153a0.jpg

5cfa8c9c83fe7fc3d8c1e2c679241221.jpg


Sent from my XT1254 using Tapatalk
 
Top