duramax

I was cruising through one of the car magazines I subscribe to and found a picture of a 1970 Chevelle with a 6.6 Duramax stuffed in the engine bay. Although the car and engine are highly modified and the project is not something for the faint of heart in the area of mechanics, I thought it might...

Does anyone have any advice on how to increase my mpg. I get around 14 in town. I tow a 35DSRL and mpg goes down when I tow it which I understand, but I here people talking about so much better mileage with theirs if they are telling the truth.

Has anyone converted a 2500HD, CC, 4x4, short bed into a dually? I would like the increased pin weight and stability without having to buy a new truck... Is this possible at a "reasonable" cost?

We have a 07 Classic 2500HD with the Duramax and we keep hearing a strange noise when the engine is at 1100 to 1300 rpms. Dealer says it is the edge of the Turbo Heat Shield just slightly touching the engine that causes this. The dealer tweeked on the shield with a large screw driver and it...

Anybody running an Edge Evolution on their Duramax and experiencing "engine power reduced "message on slight inclines or small hills (when pulling 5th wheel--ours is 3600 Big Horn)? Edge is set to towing mode and truck power reduces dramatically down to 5 mph. This didn't happen until I...

We are still negotiating to buy a 35DSRL!!!????But here is my question, will my present truck be comfortable pulling it....I currently have a 2005 Chevy 2500 Duramax,with power adders like CAI,MBRP exhaust,Superchips tuner. So plenty of power but concerned re pin wt etc.....Give me your honest...

Currently looking at a Big Country 2950rk (rear kitchen) with a dry pin weight of 2285/gvwr 14,000 Would like to tow with a 2009 GMC sierra duramax 2500, either a crew cab or extended cab. The extended cab payload is 3360 and the crew cab is 3240 I want to avoid the 3500 because it only comes in...

I have interest in the 3010 Cyclone and I would like some feed back on the weight and pin weight. Will this truck work?

I have a 2006 Chevrolet w/ 6.6 Duramax and Allison Transmission. I am looking at a Sundance 3300 RCB and would like an idea on what to expect with fuel mileage on one of these larger units. Right now I pull a 19' toyhauler and get anything from 9-12 depending which way the wind is blowing :-)...

I just met a fellow BG 3055 owner who drives a 2003 duramax 3/4 ton. He has pulled it 45K in the first 3 years. He suggested that I have 2 leaf springs added to each side in the rear (duh). I have pulled my new 3055 for 500 miles without problem. What experiences/opinions are out there?

To date I have towed with the prescribed 55 front and 80 rear but would like to hear discussion of other PSI's if there is any. I have the stock tires that come with the 2007 GMC Classic.

Although GM tells us not to use fuel additives for lubricity-most of the people I encounter use it. Whats up with that? I guess that I am unsure of what to do.