installation

Hello! We'd like to have an awning installed on our Landmark 365.. we only have 1 large awning in the rear and 1 very small awning over the main door, there is an additional switch inside for another awning as well. Do I call Heartland to find out for sure this can be added and where to get...

Hi everyone, I would like to start off by introducing myself. We recently purchased a brand new 2013 Road Warrior 310 last Fall. This is our first experience having a Heartland product. We previously had a 2004 Jayco Jayflight 29BHS. My wife and I have already completed 4 weeks of camping with...

I recently purchased a Cyclone 3850 in Texas (I'm from MN) I have a Pullrite 20K slider on my Dodge 3500 crew cab. The dealer sold me a multi-fit capture plate #3365 with the hitch. The only instructions that came with it show how to shim it to match the king pin box, and install it onto the...

Over the past several months, I've been slowly upgrading the electrical system of our Cyclone 3010. First, I added four 6V batteries. Then I added a 2000W inverter. (See also: //heartlandowners.org/showthread.php/22253-Cyclone-3010-Battery-Upgrade?highlight= and...

I did it, took the 15 hour trip to Elkhart and had the MorRyde IS system installed. While I was there I also had them install their pin box. BIG difference in ride and handling. On the trip home the rig handled beautifully. I hit the end of tropical storm Ida on the way back and it did not...

For those of you looking to step up to a medium duty truck, there are tons of trucks on the market at great prices right now but for medium duty class 4 - 6 trucks it is difficult to find one with air ride, especially if it has hydraulic brakes. There are several options out there to...

Has anyone installed a dyer vent in a 3250tc. Is there studs in the front or some template maybe some measurements that could help? Thanks in advance

Last week I ordered a new 3010 with the washer dryer combo. When installed at the factory, is it "vented" to the outside. I thought I saw a unit installed with what looked like a normal residential style dryer discharge. But after looking at so many trailers and 3 different factory tours I...

I decided to go ahead and put a second a/c unit in our Landmark. I searched through the forums here and decided on a 13500 BTU carrier low profile. I found a new one on Ebay for $569 and also ordered the heat strip option for $49. I installed the unit today and wanted to relay a couple of...

We will be at MorRyde May 6-7 for the IS, DB and NL Hubs. Question we have is whether to go with 7,000 lb or upgrade to 8,000 lb axle equivalent? It is our understanding that the higher weight will make for rougher ride of the RV. Would appreciate input from others who have already had the IS...

I just purchased a solar panel which I want to install myself. After reading the instructions everything is quite straight forward. The only thing I really did not find is the best technique to mount it to the fifth wheel roof. We have an 09 3055 which utilizes the metal framed trusses in the...

I realize the importance of having good compressor on board, but did not want to donate that much space in the storage area to one. While trying to fix my many water leaks behind the "wall" I discovered all the wasted space back there. I read through the air compressor discussion in the camping...

We have an 09 3055. I will be installing a roof system in the distant future. Does anyone have recommendations on panel types and running the wire etc. I would like to put the controller in the existing utility cupboard at the front door. I am leaning towards two panels with an output of 220...

I installed a solar panel on the roof of my 09 Big Horn. The dealer suggested drilling a hole in the roof above the bathroom, removing the small panel behind the toilet and running the cables down into the basement and then into the controller. I didn't like the idea of drilling into the roof...

We want to install the Splendie Ariston w/d in our Landmark Augusta. It is pre-plumbed in the closet, and although we can get the 2 units into the bedroom by removing the bathroom molding, we can not figure out how to get the units stacked in the closet. We have measured countless times...