freddielam1111
Member
HI there,
I noticed the other day the rear grey tank was leaking right at the exit pipe that leads to the flushing valve, where there is a fair amount of foam sealant. Upon further investigation I realized that the tank is actually covered by a black plastic cover, which I also realized that the leak was coming from that cover being full of water and over flowing. I drilled a tiny hole at the lowest point of the cover to drain all the water out, nothing leaking since.
I am guessing I have overflowed the grey tank and the excess water dripped into the black cover but just wanted to know how would the grey tank overflow in there, thought if the tank is full it would back up to the sinks.
Hope this all makes sense, thank you for your help.
Fred
I noticed the other day the rear grey tank was leaking right at the exit pipe that leads to the flushing valve, where there is a fair amount of foam sealant. Upon further investigation I realized that the tank is actually covered by a black plastic cover, which I also realized that the leak was coming from that cover being full of water and over flowing. I drilled a tiny hole at the lowest point of the cover to drain all the water out, nothing leaking since.
I am guessing I have overflowed the grey tank and the excess water dripped into the black cover but just wanted to know how would the grey tank overflow in there, thought if the tank is full it would back up to the sinks.
Hope this all makes sense, thank you for your help.
Fred
Last edited: