2017 4005 Garage toilet repair kit

HPnMORE4J

Member
Need to rebuild the porcelain toilet in the garage and don't know what kit will be needed. I don't see any info on the toilet itself.
Any ideas on where to start?
 

jmarnell

Well-known member
There should be a label on the back of the toilet showing the brand and model. Our 2018 4005 uses the Thetford Style II High. I just used my cell phone to reach behind the toilet and take a photo of the label so I could get the correct seals for ours.

20190731_173905.jpg
 

HPnMORE4J

Member
There should be a label on the back of the toilet showing the brand and model. Our 2018 4005 uses the Thetford Style II High. I just used my cell phone to reach behind the toilet and take a photo of the label so I could get the correct seals for ours.

View attachment 66125
Thanks! Probably the same, need to pull my SXS out before I can get back in the bathroom
Did you find a good source for your parts?
 

jmarnell

Well-known member
I bought the seals from Amazon. Only $14 for the kit with the bottom and bowl seals. The part number was Thetford 34120.
 

LBR

Well-known member
Need to rebuild the porcelain toilet in the garage and don't know what kit will be needed. I don't see any info on the toilet itself.
Any ideas on where to start?
I bought this kit last year and rebuilt our 2017 CY main toliet...you can use this kit# as a reference to read the applications it fits...
39888a72ca45d6d0dbda3ab3fcac2325.jpg
 

HPnMORE4J

Member
As in the supplied waste ball dump valve, or the water inlet valve/kit?
I've got to take it out and look. It's all started when I noticed a small drip leak coming down from the bathroom over the wheels. I went to flush the toilet and the waste ball dropped down. As long as I'm in there I might as well replace as much as possible.
 

LBR

Well-known member
I've got to take it out and look. It's all started when I noticed a small drip leak coming down from the bathroom over the wheels. I went to flush the toilet and the waste ball dropped down. As long as I'm in there I might as well replace as much as possible.
Yes sir...I spent part of a day to remove, disassemble, inspect parts, clean everything up outside with a garden hose, install the kit, and replaced the toytoy.
 
Top