Howdy,
We just recently purchased a 2016 Road Warrior 420. So far everything has been great with it. We are trying to figure out the living room area TV set-up; specifically cable routing. The TV is mounted high, and to it's left are all of it's hook-up ports, jacks, etc. There is a off-air coax TV antenna hookup, that is hooked up to the TV. There is what I presume to be a empty coax connector for satellite. We do have a satellite dish installed, it's looped through via the UDC, 1st receiver is supposed to go in the bedroom closet, and does work. What we're trying to figure out, before I go pulling the TV down, is where do you route coax from the satellite jack down in to the cabinet where the bluray player sits? I can only assume that is the intent for placement of a receiver, but can't figure our without pulling everything apart what my path will be. Has anyone else already been through this and can verify that I do have to pull down the TV?
It also looks like I might have to pull the face trim off the cabinet (w/door) to access the upper speaker "compartment" to get through it? It appears to be affixed with 4 screws that have wood plugs concealing them. There's multiple shelves/dividers within that I will have to pass through, some already have cables going through holes for the speakers, etc for the sounds system.
Here's the best picture I could find, and I labeled the various locations of things. I drew in red lines indicating the approximate location of the dividers/shelves I will have to pass through. The upper most is what I imagine might be at the top of the speaker compartment, but I can't figure out how else to expose it. I mostly just want to verify what I have ahead of myself or what to expect if/when I have to pull down the TV and/or that trim.
Thanks for any insight anyone might have.
We just recently purchased a 2016 Road Warrior 420. So far everything has been great with it. We are trying to figure out the living room area TV set-up; specifically cable routing. The TV is mounted high, and to it's left are all of it's hook-up ports, jacks, etc. There is a off-air coax TV antenna hookup, that is hooked up to the TV. There is what I presume to be a empty coax connector for satellite. We do have a satellite dish installed, it's looped through via the UDC, 1st receiver is supposed to go in the bedroom closet, and does work. What we're trying to figure out, before I go pulling the TV down, is where do you route coax from the satellite jack down in to the cabinet where the bluray player sits? I can only assume that is the intent for placement of a receiver, but can't figure our without pulling everything apart what my path will be. Has anyone else already been through this and can verify that I do have to pull down the TV?
It also looks like I might have to pull the face trim off the cabinet (w/door) to access the upper speaker "compartment" to get through it? It appears to be affixed with 4 screws that have wood plugs concealing them. There's multiple shelves/dividers within that I will have to pass through, some already have cables going through holes for the speakers, etc for the sounds system.
Here's the best picture I could find, and I labeled the various locations of things. I drew in red lines indicating the approximate location of the dividers/shelves I will have to pass through. The upper most is what I imagine might be at the top of the speaker compartment, but I can't figure out how else to expose it. I mostly just want to verify what I have ahead of myself or what to expect if/when I have to pull down the TV and/or that trim.
Thanks for any insight anyone might have.
Last edited by a moderator: