I believe Andersen hitches are well under $ 1,000This is pretty opinionated. But we personally find fifth wheels to be smoother rides and easier to maneuver. Having the pivot point be over your rear tires instead of the bumper means you can make much tighter turns backing up. And fifth wheel hitches can be rated for much higher loads, although if you want your max to be 30' that won't matter much to you. Finally, fifth-wheel campers typically have higher ceilings and more space for an equivalent length due to the portion that sits "up and over" the truck.
That being said, the hitches themselves are also often MUCH more expensive (all three parts of our Curt, together, were like $1700 IIRC), are very heavy, and take a lot of bed space. I think there's something to be said for both types...
Questions about the truck, is it stock? Have you modified the suspension or put larger tires on the truck?1st time soon to be camper trailer owner. Now I have a Dodge 250 Cummings diesel pick up. And we want to stay under the 30’ mark 5th wheel vs bumper tow pros and cons would be appreciated from experienced drivers
Thank you for your input on this gentleman. I too do like the idea of a fifth for handling. But I am also coming across the latest and greatest of a what they call goose neck pin box or something like that, and this allows you to remove the ball hitch, when not in use but putting all that weight on the ball hitch, I do have some concerns. Seems like an awful lot of pressure on one spot versus the kingpin and fifth wheel plate. has anyone had any experience with this gooseneck style?This is pretty opinionated. But we personally find fifth wheels to be smoother rides and easier to maneuver. Having the pivot point be over your rear tires instead of the bumper means you can make much tighter turns backing up. And fifth wheel hitches can be rated for much higher loads, although if you want your max to be 30' that won't matter much to you. Finally, fifth-wheel campers typically have higher ceilings and more space for an equivalent length due to the portion that sits "up and over" the truck.
That being said, the hitches themselves are also often MUCH more expensive (all three parts of our Curt, together, were like $1700 IIRC), are very heavy, and take a lot of bed space. I think there's something to be said for both types...
I've used the Andersen Ultimate hitch for 8 years pulling for many many K miles. I pull a 35 ft Heartland 3270 rs well within the weight limits of the hitch. You'll hear the old timers tell you all kinds of stories about safety and this and that. I'll just tell you it's easy and it works for me. Interestingly enough other manufactures have started selling ball type hitches as well.Thank you for your input on this gentleman. I too do like the idea of a fifth for handling. But I am also coming across the latest and greatest of a what they call goose neck pin box or something like that, and this allows you to remove the ball hitch, when not in use but putting all that weight on the ball hitch, I do have some concerns. Seems like an awful lot of pressure on one spot versus the kingpin and fifth wheel plate. has anyone had any experience with this gooseneck style?
I have had an Andersen Ultimate for the last 7 years. Have also had some tell me they are unsafe because they are aluminum. I just suggest they should probably never fly in an airplane. I can say that in the past, there have been times when backing into an uneven camp site, my conventional hitch would not disconnect, causing the need to disassemble the capture plate from the hitch in order to get it off. Never had that problem with the Andersen.I've used the Andersen Ultimate hitch for 8 years pulling for many many K miles. I pull a 35 ft Heartland 3270 rs well within the weight limits of the hitch. You'll hear the old timers tell you all kinds of stories about safety and this and that. I'll just tell you it's easy and it works for me. Interestingly enough other manufactures have started selling ball type hitches as well.
Re:truck Yes it is all stock. I came across it searching the web 2011 Dodge Laramie Cummins Diesel, only 56k on it and doesn't take the def 👍 Thanks againQuestions about the truck, is it stock? Have you modified the suspension or put larger tires on the truck?
Any upgrades to the truck?
The reason I am asking is, if you have installed a lift kit and larger tires, you may have some issues towing the 5th wheel level.
I find that style very appealing and seriously considered it myself. But the gooseneck conversions are actually super expensive and complex to DIY (they're very heavy), plus I read some bad reviews of folks with frame cracking due basically adding a 2' lever to where the attachment point is. I have ZERO personal knowledge of whether any of this is true, but it did put me off purchasing one.Thank you for your input on this gentleman. I too do like the idea of a fifth for handling. But I am also coming across the latest and greatest of a what they call goose neck pin box or something like that, and this allows you to remove the ball hitch, when not in use but putting all that weight on the ball hitch, I do have some concerns. Seems like an awful lot of pressure on one spot versus the kingpin and fifth wheel plate. has anyone had any experience with this gooseneck style?