Anode Pic After 5.5 Months Full Timing

rxbristol

Well-known member
Today, I changed the Suburban magnesium anode after 5.5 months of full timing:

2014-07-12 09.49.15.jpg

Looks like I'll put in on a regular six month schedule of things to do.
 

jbeletti

Well-known member
I'm sure, but, as with most things, I usually operate in the realm of "better safe than sorry."

Agreed. If I had mine out and it had 50% left and I had a new anode rod on-hand, I'd have replaced it and moved on as well. Did you use one of those hook tools to rinse the crud out of the tank while you were at it?
 

MTPockets

Well-known member
Agreed. If I had mine out and it had 50% left and I had a new anode rod on-hand, I'd have replaced it and moved on as well. Did you use one of those hook tools to rinse the crud out of the tank while you were at it?
I use a screwdriver with a 90 degree bend that I found in my toolbox. Works great. So they actually make a tool for this purpose?
 

rxbristol

Well-known member
Agreed. If I had mine out and it had 50% left and I had a new anode rod on-hand, I'd have replaced it and moved on as well. Did you use one of those hook tools to rinse the crud out of the tank while you were at it?

I did use a water clean-out wand...it got a lot of extra gunk out.
 

TXBobcat

Fulltime
If you would use filters on your fresh water you wouldn't have one get eat up as bad. I have gone a year before I changed mine out. This happens if you stay where they use hard water or/and are on well water.

BC
 

JohnDar

Prolifically Gabby Member
Heck, I'm still using the anode rod that came with the rig. Filtration (and good water) work.


Sent from my iPhone using Tapatalk
 

Birchwood

Well-known member
I change my anode rod every two years but thoroughly flush the tank each year.Probably depends on the water you mostly use.
 
Top